গুণগত মান ক্লিয়াৰেন্স, আৰু নিৰ্ভৰযোগ্য শক্তি মডিউল নিৰ্মাতা কেনেকৈ বাছি ল'ব?
গৃহ - ব্লগ - উদ্যোগৰ বাতৰি - শক্তি মডিউল নিৰ্বাচনৰ সমস্যা কেনেকৈ সমাধান কৰিব

শক্তি মডিউল নিৰ্বাচনৰ সমস্যা কেনেকৈ সমাধান কৰিব

Author: ZYG Power Module Time: 2022-12-20

It is not easy to select a power module. There are many difficulties to consider. How much do you know?

Magnetic beads, capacitors, diodes, resistors… all have similar inside stories, but people don’t pay much attention to them. There are various topologies of power modules, such as flyback, forward, push-pull, half-bridge, and full-bridge. Due to their different basic principles, each of them is mainly manifested in the advantages at the level of certain characteristic indicators.

The flyback power supply does not have a time period for charging and discharging the battery during the power switch period. That is because there is no time characteristic of the response characteristic, and the grain baud cannot be guaranteed to be very good, although it may not help much according to the energy storage capacitor , but the rationale is just a flaw.

Leakage inductance is also a big problem, but its advantages are simple power supply circuit, low cost, light weight, no need to add magnetic calibration windings, and a wider operating voltage range for typing. Because of this, its share of the total power supply sales market is about 7%.

 

 

The output voltage of the positive power supply has good transient operation characteristics and strong load capacity, but its disadvantages are also obvious. The large energy storage technology is used to filter the inductor and the freewheeling diode, which is large in size, and the back electromotive force of the primary coil of the transformer is high. .

The push-pull power supply has high transient response time, good working voltage and frequency characteristics. It is the most utilized power transformer of all topologies. No flux leakage, simple optocoupler circuit.

If the two forward converters are not completely symmetrical or balanced, the bias magnetism accumulated after many cycles will cause the magnetic core to enter a saturated state, resulting in excessive excitation current of the high-frequency transformer, and even damage the power switch tube.

The accumulative chainless power supply transformer has a large power and high working efficiency, the withstand voltage test value of the power switch tube is relatively low, and the primary coil of the transformer only needs to be wound once. The disadvantage is that the efficiency is low, there is a semiconductor area, and the consumption is large.

The above problems are all caused by the inherent advantages and disadvantages of its topology. Although people can use the power module as the black box of the aircraft, this is also a point that needs to be paid attention to when choosing a power supply.

ট্যাগসমূহ:

প্ৰাসংগিক তথ্য

  • 2024-5-30

    Power modules: Provide reliable power for your devices

    With the continuous advancement of science and technology, electronic devices have become an indispensable part of our daily lives and work. Whether it is smart home appliances, precision instruments in the enterprise, or even large equipment in industrial automation production lines, they all need a reliable power source to ensure their normal operation. The power module is the key component of this power source. 1. The power core of the equipment As the power conversion and supply unit in electronic equipment, its importance is obvious. It can convert the input power into the stable voltage and current required by the equipment, ensuring that the equipment can obtain continuous and stable power supply in various complex environments. 2. Features and Advantages...

    সবিশেষ চাওক
  • 2023-4-25

    AC-DC Power Supply: Providing Reliable and Efficient Power Conversion

    AC-DC power supply is an essential component in many electronic devices, providing reliable and efficient power conversion from the alternating current (AC) mains power to the direct current (DC) power required by the device. As the demand for electronic devices continues to rise, the importance of AC-DC power supplies in the electronics industry is increasing. One of the main advantages of AC-DC power supplies is their ability to convert AC power to DC power, which is required by most electronic devices. This enables devices to operate efficiently and reliably, as the voltage and current levels are controlled and maintained within safe limits. AC-DC power supplies are also highly efficient, with some models achieving conversion efficiencies of up to 95%. This...

    সবিশেষ চাওক
  • 2023-6-22

    Exploring the Wonders of the Electric Power Series: A Journey into Modern Energy Technologies

    Electricity is the backbone of modern society and the basis for almost all technological advancement. The electric power series, also known as the power system, is a network of interconnected power sources and electrical equipment that provides electricity to consumers. The power system is a complex network of power plants, transformers, transmission lines, and distribution networks that work together to deliver electricity to homes, businesses and industries. The power system has revolutionized the way we live, work and play, and continues to provide us with new and exciting technological advances. One of the wonders of the electric power series is the power plants that generate electricity. Power plants are facilities that produce electrical power by converting various forms of energy...

    সবিশেষ চাওক
  • 2022-12-20

    শক্তি মডিউল নিৰ্বাচনৰ সমস্যা কেনেকৈ সমাধান কৰিব

    এটা শক্তি মডিউল নিৰ্বাচন কৰাটো সহজ নহয়। বহু অসুবিধাৰ কথা বিবেচনা কৰিব লাগে। আপুনি কিমান জানে? মেগনেটিক বিড, কেপাচিটৰ, ডাইঅ’ড, ৰেজিষ্টৰ... সকলোবোৰৰ ভিতৰৰ কাহিনী একে, কিন্তু মানুহে ইয়াৰ প্ৰতি বিশেষ গুৰুত্ব নিদিয়ে। শক্তি মডিউলসমূহৰ বিভিন্ন টপোলজি আছে, যেনে ফ্লাইবেক, আগলৈ, পুছ-পুল, হাফ-ব্ৰিজ, আৰু সম্পূৰ্ণ-ব্ৰিজ। ইহঁতৰ বিভিন্ন মৌলিক নীতিৰ বাবে ইয়াৰ প্ৰত্যেকটোৱেই মূলতঃ কিছুমান বিশেষ বৈশিষ্ট্যপূৰ্ণ সূচকৰ স্তৰত সুবিধাসমূহত প্ৰকাশ পায়। পাৱাৰ চুইচৰ সময়ছোৱাত বেটাৰী চাৰ্জ আৰু ডিচাৰ্জ কৰাৰ বাবে ফ্লাইবেক পাৱাৰ চাপ্লাইৰ কোনো সময়সীমা নাই। কাৰণ প্ৰতিক্ৰিয়া বৈশিষ্ট্যৰ কোনো সময়ৰ বৈশিষ্ট্য নাই, আৰু শস্যৰ ব'ড অতি ভাল হোৱাৰ নিশ্চয়তা দিব নোৱাৰি, যদিও...

    সবিশেষ চাওক
  • 2023-4-14

    AC-DC Converter: Changing Alternating Current to Direct Current

    AC-DC converters are electronic devices that are used to change alternating current (AC) to direct current (DC). The process of converting AC to DC is important for many electrical devices that require a steady source of DC power. These devices are used in a wide range of applications such as power supplies, battery chargers, and LED lighting systems. The process of converting AC to DC involves several steps. The first step is the rectification of AC voltage. This can be achieved using a diode, which allows the positive half-cycle of the AC waveform to pass through, while blocking the negative half-cycle. The result is a pulsating DC voltage that is still not suitable for most applications. The second step is...

    সবিশেষ চাওক
  • 2023-8-26

    DM Series DC DC Power Supply manufacture

    DM Series DC DC Power Supply is a cutting-edge technology that has revolutionized the power supply industry. This innovative and versatile product offers a wide range of benefits and features that make it an ideal choice for various applications. In this article, we will delve into the details of the DM Series DC DC Power Supply and explore why it has gained such popularity in the market. First and foremost, the DM Series DC DC Power Supply is known for its high efficiency and reliability. It utilizes advanced power conversion technology, which ensures minimum energy loss and maximum power output. This means that it can deliver a stable and consistent power supply, even in demanding conditions. Whether you are using...

    সবিশেষ চাওক

6000+ বিকল্প, এক-ষ্টপ শক্তি যোগান সমাধান