nyheder
Om vigtigheden, strukturen og hvordan man vælger DC-DC strømmodulet?
Author： ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
relevant information
-
2023-9-16
Maximize Efficiency and Flexibility with a Modular Power Supply for Your PC
Having a reliable and efficient power supply is crucial for any PC user. Whether you are a gamer, a professional, or a casual user, investing in a modular power supply can significantly enhance your computing experience. A modular power supply provides several benefits, including increased efficiency, flexibility, and overall system performance. One of the primary advantages of a modular power supply is its enhanced efficiency. These power supplies are designed to deliver power more efficiently, resulting in reduced energy consumption and lower electricity bills. Traditional power supplies have fixed cables that can lead to cable clutter, hindering proper airflow within the PC case. This can cause overheating and reduced efficiency. In contrast, a modular power supply allows users to connect...
Se detaljer -
2023-8-5
HP Series: Unleashing the Power of AC DC Converters
Introduction: In today's tech-savvy world, the demand for efficient and reliable power supply solutions is continuously increasing. AC DC converters play a crucial role in transforming alternating current (AC) into direct current (DC) to power various electronic devices and equipment. Among the leading brands in this domain is HP, with its HP Series AC DC converters. This article will delve into the features and advantages of these converters, highlighting their significance in different sectors. 1. Efficient Power Conversion: The HP Series AC DC converters are known for their high efficiency in power conversion. With cutting-edge technology and advanced design, these converters minimize power losses and maximize energy efficiency. This ensures that the converted DC power is delivered to the load...
Se detaljer -
2023-4-24
How to Build an AC-DC Power Supply
Introduction An AC-DC power supply is an essential component in many electronic devices, providing a constant and reliable source of power. These power supplies can be used in a wide range of applications, from powering small electronic devices like smartphones to larger appliances like refrigerators and air conditioners. Building one of these devices is a relatively simple process, and can be done with some basic knowledge of electronics and a few common components. Step 1: Choose the Transformer The first step in building an AC-DC power supply is to choose an appropriate transformer. The transformer will convert the AC voltage from the wall outlet into a lower voltage that can be used by the power supply. The voltage needed will...
Se detaljer -
2023-7-5
120V AC to 12V DC Converter: Effortless Voltage Transformation for Your Electrical Needs
Introduction In today's modern world, electricity is an indispensable part of our lives. From powering our homes to running various electrical devices, it plays a crucial role in making our lives convenient and comfortable. However, not all electrical devices operate on the same voltage, which can create a challenge when trying to connect them to a power source. This is where a 120V AC to 12V DC converter comes into play. This device effortlessly transforms voltage, allowing you to meet your electrical needs without any hassle. Understanding the Basics Before delving into the benefits and applications of a 120V AC to 12V DC converter, it is important to understand the basics. AC stands for alternating current, which is the type...
Se detaljer -
2023-6-12
Bidirectional DC-DC Converter: Efficient Power Conversion in Both Directions
The need for efficient power conversion is becoming increasingly important in today's world. As the demand for energy continues to grow, it is essential to find ways to optimize power conversion in various systems. One such system that requires efficient power conversion is the bidirectional DC-DC converter. The bidirectional DC-DC converter is a type of power converter that can transfer energy in both directions. This means that it can convert DC voltage from a source to a load, and also from a load to a source. This bidirectional functionality is particularly useful in applications where energy needs to be transferred back and forth between two sources, such as in hybrid electric vehicles and renewable energy systems. The efficiency of power...
Se detaljer -
2023-5-12
24V AC to DC Converter: Converting Alternating to Direct Current
Introduction In today's world, electricity is an integral part of our daily lives. It powers almost everything we use, from the lights in our homes to the computers we work on. However, the electricity we use is not always in a form that we can use. Alternating current (AC) is the form of electricity that is typically supplied by power companies, while most of our devices and appliances require direct current (DC) to operate. This is where a 24V AC to DC converter comes in handy. What is a 24V AC to DC Converter? A 24V AC to DC converter is a device that converts alternating current (AC) into direct current (DC). It takes in AC power and outputs DC...
Se detaljer