About Small size power module suppliers

Due to technological advancements in many areas, more and more suppliers are offering power modules. Now is the time to take advantage of a new generation of power modules.

The need for higher density circuit boards and reduced system size has driven the need for smaller DC/DC solutions, which has led to the development of power modules.

Power modules are used in power conversion equipment such as industrial motor drives, embedded motor drives, uninterruptible power supplies, AC-DC power supplies, and welder power supplies.

Power modules integrate most of the components required for a power supply (synchronous switching regulator ICs, inductors, resistors, and capacitors) into a compact package. The result is an efficient and compact fully integrated solution that meets EMI requirements and keeps power supply design as simple as possible. Designers can move between modules and ICs as needed to trade off cost, size, and ease of use.

 

Lær mere
Leverandører af små strømmoduler
Leverandører af små strømmoduler
AC-DC konverter
DC-DC konverter
AC-DC strømforsyning
Speciel strømforsyning
DC-DC strømforsyning
ANSØGNING
seneste blogs
Se mere
Designing an Industrial AC-DC Converter

2023-5-7

Introduction An AC-DC converter is an essential component in industrial power systems. It is used to convert the alternating current (AC) power from the grid into the direct current (DC) power that is required by various industrial devices. The design of an AC-DC converter is critical because it affects the efficiency, reliability, and performance of the entire power system. In this article, we will discuss the key factors to consider when designing an industrial AC-DC converter. Input Circuit The input circuit of an AC-DC converter is responsible for rectifying the AC power from the grid into DC power. The most common type of input circuit is the full-wave rectifier, which consists of four diodes arranged in a bridge configuration. When the AC voltage is positive, two diodes conduct current, and when the AC voltage is negative, the other two diodes conduct current. This results in a DC voltage that is the average of the AC voltage. Filter Circuit The filter circuit of an AC-DC converter is responsible for smoothing out the pulsed DC voltage from the input circuit. The simplest type of filter circuit is the capacitor filter, which consists of a capacitor connected in parallel with the load. The...
Efficient and Reliable ACDC Power Supply SF Series (3~100W)

2023-5-26

The SF Series of ACDC power supplies is an efficient and reliable option for powering a variety of electronic devices. With a range of power outputs from 3W to 100W, these power supplies are suitable for a wide range of applications. One of the key features of the SF Series is its high efficiency. These power supplies have an efficiency rating of up to 90%, which means that they waste less energy and generate less heat than less efficient models. This not only helps to reduce energy costs, but also increases the lifespan of the power supply by reducing the stress on its components. The SF Series is also highly reliable, with a long service life and a low failure rate. This is due in part to its high-quality components, which are carefully selected and tested to ensure that they meet strict performance standards. Additionally, the power supplies are designed to operate at a wide range of temperatures and humidity levels, making them suitable for use in a variety of environments. Another advantage of the SF Series is its flexibility. These power supplies are available in a range of sizes and configurations, including open-frame and enclosed models. This allows users...
Vigtigheden af kvalitetskontrol i engrosproduktion af AC-DC strømforsyninger

2023-3-2

When it comes to wholesale AC-DC power supply manufacturing, quality control is of utmost importance. AC-DC power supplies are widely used in various industries, including telecommunications, medical devices, and consumer electronics, to name a few. They convert alternating current (AC) to direct current (DC) and are responsible for providing the appropriate level of power to devices. Poor quality AC-DC power supplies can result in malfunctions, damage to equipment, and even pose a safety risk. Therefore, it is essential to have strict quality control measures in place throughout the manufacturing process. One crucial aspect of quality control in AC-DC power supply manufacturing is testing. Testing should be conducted at various stages of the manufacturing process to ensure that the final product meets the required standards. This can include testing the individual components, such as capacitors and transformers, as well as testing the finished product.     In addition to testing, quality control measures should also include supplier management. This involves carefully selecting suppliers and conducting regular audits to ensure that they meet the necessary quality standards. Another important aspect of quality control is documentation. All aspects of the manufacturing process, including design, production, and testing, should be thoroughly documented. This documentation...
Building a 120V AC Power Supply for 3V DC Output

2023-4-25

Introduction In this project, we will be designing a 120V AC power supply that will convert the high voltage AC input to a low voltage DC output of 3V. The power supply will be used to power small electronic devices that require a low voltage DC supply. Design The first step in designing the power supply is to select the components required for the circuit. We will be using a step-down transformer to reduce the high voltage AC input to a low voltage AC output. The AC output will then be rectified using diodes, and the resulting DC voltage will be filtered using capacitors to remove any residual AC ripple. Finally, the regulated DC voltage will be produced using a voltage regulator. Transformer Selection The transformer is the heart of the power supply and is responsible for converting the high voltage AC input to a low voltage AC output. The transformer should be chosen to match the AC input voltage and provide a suitable AC output voltage for rectification. For our power supply, we will be using a transformer with a primary voltage rating of 120V and a secondary voltage rating of 9V. This will give us an AC output...
Building a 120V AC to 3V DC Power Supply

2023-4-18

Introduction: A power supply is an essential component in any electrical or electronic system. It provides the necessary power for the system to operate. In this article, we will discuss how to build a 120V AC to 3V DC power supply. The power supply can be used for a variety of applications such as powering low voltage circuits, charging batteries, and powering small electronic devices. Design: The power supply is designed to convert the 120V AC voltage from the mains into a 3V DC voltage. The power supply consists of a transformer, a bridge rectifier, and a voltage regulator. Transformer: The transformer is used to step down the 120V AC voltage to a lower voltage suitable for the power supply. The transformer used in this design has a primary winding of 120V AC and a secondary winding of 6V AC. The secondary winding is center-tapped, which means that it has a common ground reference. Bridge Rectifier: The bridge rectifier is used to convert the AC voltage from the transformer into a DC voltage. The bridge rectifier is made up of four diodes that are arranged in a bridge configuration. The output of the bridge rectifier is a pulsating DC voltage...
120V AC to 12V DC Converter manufacture: Efficient Voltage Conversion for Various Devices

2023-8-12

Introduction: In the world of electronics, voltage conversion is a crucial process that enables devices to function optimally. One such conversion is the transformation of 120V alternating current (AC) to 12V direct current (DC). This article will discuss the importance of efficient voltage conversion and explore the benefits of a 120V AC to 12V DC converter for various devices. Understanding Voltage Conversion: Voltage conversion refers to the alteration of electrical potential between different levels. In the case of a 120V AC to 12V DC converter, the aim is to convert the high voltage alternating current commonly found in power outlets into low voltage direct current suitable for powering electronic devices. This conversion is achieved through a series of electrical components and circuits. Importance of Efficient Voltage Conversion: Efficient voltage conversion is crucial for several reasons. Firstly, it ensures that devices receive the appropriate level of power supply, preventing any potential damage caused by over or under voltage. Secondly, efficient conversion reduces energy wastage, making it an environmentally friendly choice. Lastly, it enhances the overall performance and longevity of electrical devices, as they operate at their intended voltage levels. Benefits of a 120V AC to 12V DC Converter: 1. Versatility: A...
What factors affect the power generation efficiency of photovoltaic power sources?

2024-10-15

Photovoltaic power sources, as a technology that converts solar energy into electrical energy, have a power generation efficiency that is an important indicator of their performance. However, in actual applications, the power generation efficiency of PV power sources is affected by many factors. The following is a detailed analysis of these influencing factors: 1. Light Intensity Light intensity is the primary factor that affects the power generation efficiency of photovoltaic power sources. The intensity of sunlight directly determines how much energy photovoltaic cells can absorb and convert into electrical energy. In areas with high light intensity, the power generation efficiency of photovoltaic power source is usually higher. On the contrary, when the light intensity is low or blocked, the power generation efficiency will be significantly reduced. 2. Temperature Temperature is also one of the key factors affecting the power generation efficiency of PV power source. As the temperature increases, the power generation efficiency of photovoltaic cells will gradually decrease. This is because high temperature causes the energy band structure of photovoltaic cells to change, making it more difficult for electron transitions to occur, thereby reducing the efficiency of converting light energy into electrical energy. Therefore, during the high temperature period...
Efficient 12V AC to DC Converter for LED Lights

2023-5-22

LED lighting has revolutionized the way we light our homes and workplaces. LED lights are energy-efficient, long-lasting, and eco-friendly. They consume less energy, emit less heat, and have a longer lifespan than traditional incandescent bulbs. However, to use LED lights, you need a power source that supplies direct current (DC), while most homes and businesses have alternating current (AC) power supplies. This is where a 12V AC to DC converter comes in handy. A 12V AC to DC converter or power supply is a device that converts Alternating Current (AC) to Direct Current (DC) voltage. The converter is essential for powering electronic devices that require DC power, such as LED lights. The most efficient 12V AC to DC converter is one that converts AC power to DC power with minimal loss of energy. In this article, we will discuss how to choose the best 12V AC to DC converter for LED lights. Efficiency The efficiency of an AC to DC converter is measured by its efficiency rating. The efficiency rating of a converter tells you how much power is lost during the conversion process. A high-efficiency converter will have a rating of 80-90%, which means that only 10-20% of the...
EX Series DC DC Converter: Efficient Power Conversion Solution

2023-5-27

The EX Series DC DC Converter is an efficient and reliable power conversion solution designed for modern electronic applications. This converter provides a stable and regulated output voltage that meets the requirements of a wide range of electronic devices, from simple battery-powered appliances to complex industrial control systems. One of the key advantages of the EX Series DC DC Converter is its high efficiency. By using advanced power switching technology, this converter can achieve conversion efficiencies of up to 95%, reducing power losses and conserving battery life. This makes it an ideal choice for battery-operated devices that require long run times and high reliability. Another important feature of the EX Series DC DC Converter is its ability to operate over a wide input voltage range. This converter can accept input voltages ranging from 4.5V to 36V, making it suitable for use with a variety of power sources, including batteries, wall adapters, and automotive power systems. This flexibility allows designers to use the same converter in multiple applications, simplifying system design and reducing costs.     The EX Series DC DC Converter also offers a range of other features that make it a versatile and reliable choice for power conversion applications....
China Industrial AC-DC Converter: Powering Industrial Systems with Efficiency and Reliability

2023-7-16

Introduction: In today's industrial landscape, the demand for efficient and reliable power supply systems is growing at an exponential rate. Industrial systems require a steady and uninterrupted power source to operate smoothly, and the AC-DC converter plays a crucial role in providing stable power to these systems. This article explores the significance of the industrial AC-DC converter and its contribution to powering industrial systems with efficiency and reliability. Understanding the AC-DC Converter: An AC-DC converter, also known as a rectifier, is an electronic device that converts alternating current (AC) power into direct current (DC) power. In industrial settings, where most equipment and machinery operate on DC power, AC-DC converters are indispensable. These converters play a vital role in converting the power supply from the grid to the required voltage and current levels for industrial applications. Efficiency in Power Conversion: Efficiency is a critical factor when it comes to power conversion in industrial systems. The efficiency of an AC-DC converter refers to the ability to convert energy from the input source to the output with minimal losses. A high-efficiency converter ensures that the power is utilized effectively, minimizing wasted energy and reducing the overall operational costs. It also reduces the strain...
Tags: ,

6000+ muligheder, one-stop strømforsyningsløsninger