Nachrichten
Aufbau eines 120-V-AC-Netzteils für 3-V-DC-Ausgang
Autor： ZYG Leistungsmodul Time： 2023-4-19
Introduction:
In this tutorial, we will learn how to build a 120V AC power supply that outputs 3V DC. This is a simple project that can be completed by anyone with basic knowledge of electronics. The power supply can be used to power small electronic projects, such as LED lights or small motors. Let\’s get started!
Materials Required:
– 120V AC power source
– Transformer (120V AC to 3V AC)
– Bridge rectifier (1N4007)
– Capacitor (1000uF, 16V)
– Voltage regulator (LM7805)
– Heat sink
– Resistor (220 ohm)
– LED
– Breadboard
– Jumper wires
Instructions:
Step 1: Connect the Transformer
Connect the primary side of the transformer to the 120V AC power source. The secondary side of the transformer should be connected to the bridge rectifier.
Step 2: Connect the Bridge Rectifier
Connect the positive and negative terminals of the bridge rectifier to the output terminals of the transformer. The bridge rectifier will convert the 3V AC output of the transformer to a pulsating DC output.
Step 3: Connect the Capacitor
Connect the positive terminal of the capacitor to the positive output of the bridge rectifier. The negative terminal of the capacitor should be connected to the ground.
Step 4: Connect the Voltage Regulator
Connect the output of the capacitor to the input of the voltage regulator. The voltage regulator is used to regulate the voltage and provide a stable 3V DC output. The voltage regulator should be mounted on a heat sink to dissipate heat.
Step 5: Connect the Resistor and LED
Connect the resistor to the output of the voltage regulator. The LED should be connected in series with the resistor. The resistor is used to limit the current flowing through the LED.
Step 6: Test the Power Supply
Connect the power supply to a load, such as an LED or small motor, to test the output voltage. The output voltage should be 3V DC.
Conclusion:
In this tutorial, we have learned how to build a simple 120V AC power supply that outputs 3V DC. This power supply can be used to power small electronic projects and is a great starting point for those new to electronics. With some basic components, this power supply can be built in just a few minutes.
relevante Information
-
2023-6-15
High-Efficiency AC DC Power Supply with PFC Technology
In today's world, electronic devices have become essential for our daily lives. From smartphones and laptops to home appliances and industrial machinery, we rely on these devices to keep us connected, entertained, and productive. However, these devices require a significant amount of power to operate, which can lead to higher energy bills and increased energy consumption. This is where high-efficiency AC DC power supplies with PFC technology come in. A high-efficiency AC DC power supply with PFC (Power Factor Correction) technology is a type of power supply that can convert the alternating current (AC) from the main power supply into direct current (DC) that can be used by electronic devices. The PFC technology allows the power supply to maintain a...
Einzelheiten anzeigen -
2023-5-26
DC Power Conversion: Understanding the Basics and Applications
Direct current (DC) power conversion is an essential process in our modern world. It involves the transformation of electrical energy from one form to another. DC power conversion is widely used in various areas, from household appliances to industrial automation, and from renewable energy generation to electric vehicles. In this article, we will discuss the basics of DC power conversion and its applications. DC Power Conversion Basics DC power conversion involves three main components: input source, conversion circuit, and output load. The input source can be an AC power source, a battery, or a renewable energy source like solar or wind. The conversion circuit is responsible for converting the input power to the desired output power. It consists of voltage...
Einzelheiten anzeigen -
2023-5-29
LED Power Series: The Ultimate Guide to High-Efficiency Lighting Solutions
In recent years, there has been a shift towards energy-efficient lighting solutions. One of the most popular options is LED lighting. LEDs, or light-emitting diodes, are semiconductor devices that produce light when an electrical current is passed through them. They are highly efficient, long-lasting, and eco-friendly. In this guide, we will explore the benefits of LED lighting and how it can save you money while reducing your carbon footprint. Benefits of LED Lighting Energy Efficiency: LED lighting is highly energy-efficient compared to traditional lighting solutions. LEDs use up to 75% less energy than incandescent bulbs and last up to 25 times longer. This means you can save money on your energy bill while reducing your carbon footprint. Long Life: LED...
Einzelheiten anzeigen -
2023-5-7
Designing an Industrial AC-DC Converter
Introduction An AC-DC converter is an essential component in industrial power systems. It is used to convert the alternating current (AC) power from the grid into the direct current (DC) power that is required by various industrial devices. The design of an AC-DC converter is critical because it affects the efficiency, reliability, and performance of the entire power system. In this article, we will discuss the key factors to consider when designing an industrial AC-DC converter. Input Circuit The input circuit of an AC-DC converter is responsible for rectifying the AC power from the grid into DC power. The most common type of input circuit is the full-wave rectifier, which consists of four diodes arranged in a bridge configuration. When...
Einzelheiten anzeigen -
2023-10-13
Fully Modular Power Supply: The Key to Efficient Cable Management
Efficiency is the key to success. This holds true for many aspects of our lives, including cable management in our electronic devices. One innovative solution to the tangled mess of cables is the fully modular power supply. A power supply is an essential component of any electronic device, providing the necessary electrical power to make it function. Traditionally, power supplies come with a fixed set of cables that connect to various components within the device. However, this can lead to a multitude of cables snaking through the system, causing impedance in airflow and hindering overall performance. The concept of a fully modular power supply aims to tackle this issue head-on. Unlike its traditional counterparts, a fully modular power supply allows...
Einzelheiten anzeigen -
2022-7-26
So wählen Sie einen zuverlässigen DC-DC-Stromversorger in China aus
DC bedeutet Gleichstrom. Gleichstrom ist als unidirektionaler Strom definiert. Bei einem Gleichstrom bewegen sich Elektronen ohne Richtungsänderung von einem Bereich mit negativer Ladung zu einem Bereich mit positiver Ladung. Dieser Zustand bleibt trotz Wechselstrom bestehen, bei dem sich der Strom in beide Richtungen bewegen kann. Gleichstrom kann leitende und halbleitende Materialien passieren. Elektrizität ist definiert als der Fluss von Elektronen durch einen Leiter, z. B. einen Draht. Strom baut sich auf zwei Arten auf, abwechselnd und direkt. Der Hauptunterschied zwischen Wechsel- und Gleichstrom ist die Bewegungsrichtung der Elektronen. DC-DC wird mit der Idee des Schaltnetzteils realisiert. Es gibt zwei Arten von DC-DC, Buck und Boost, die hier Buck genannt werden. Zum Beispiel,...
Einzelheiten anzeigen