Nachrichten
So lösen Sie das Problem der Auswahl des Leistungsmoduls
Autor： ZYG Leistungsmodul Time： 2022-12-20
It is not easy to select a power module. There are many difficulties to consider. How much do you know?
Magnetic beads, capacitors, diodes, resistors… all have similar inside stories, but people don’t pay much attention to them. There are various topologies of power modules, such as flyback, forward, push-pull, half-bridge, and full-bridge. Due to their different basic principles, each of them is mainly manifested in the advantages at the level of certain characteristic indicators.
The flyback power supply does not have a time period for charging and discharging the battery during the power switch period. That is because there is no time characteristic of the response characteristic, and the grain baud cannot be guaranteed to be very good, although it may not help much according to the energy storage capacitor , but the rationale is just a flaw.
Leakage inductance is also a big problem, but its advantages are simple power supply circuit, low cost, light weight, no need to add magnetic calibration windings, and a wider operating voltage range for typing. Because of this, its share of the total power supply sales market is about 7%.
The output voltage of the positive power supply has good transient operation characteristics and strong load capacity, but its disadvantages are also obvious. The large energy storage technology is used to filter the inductor and the freewheeling diode, which is large in size, and the back electromotive force of the primary coil of the transformer is high. .
The push-pull power supply has high transient response time, good working voltage and frequency characteristics. It is the most utilized power transformer of all topologies. No flux leakage, simple optocoupler circuit.
If the two forward converters are not completely symmetrical or balanced, the bias magnetism accumulated after many cycles will cause the magnetic core to enter a saturated state, resulting in excessive excitation current of the high-frequency transformer, and even damage the power switch tube.
The accumulative chainless power supply transformer has a large power and high working efficiency, the withstand voltage test value of the power switch tube is relatively low, and the primary coil of the transformer only needs to be wound once. The disadvantage is that the efficiency is low, there is a semiconductor area, and the consumption is large.
The above problems are all caused by the inherent advantages and disadvantages of its topology. Although people can use the power module as the black box of the aircraft, this is also a point that needs to be paid attention to when choosing a power supply.
Vorherige: Die Auswahl eines Leistungsmoduls und Vorsichtsmaßnahmen ist sehr wichtig
Nächste: The Importance of Quality Control in China DC-DC Converter Manufacturing
relevante Information
-
2022-10-11
Für Leistungsmodule mit kleinem Formfaktor stehen viele Anbieter zur Auswahl. So wählen Sie ein Leistungsmodul aus, das zu Ihnen passt. Was ist ein Leistungsmodul mit kleinem Formfaktor? Ein kleines Leistungsmodul ist ein elektronisches Bauteil, mit dem Wechselstrom in Gleichstrom umgewandelt wird. Sie werden häufig in elektronischen Geräten verwendet, um interne Komponenten mit Strom zu versorgen. Leistungsmodule mit kleinem Formfaktor sind in einer Vielzahl von Formen und Größen erhältlich und für eine Vielzahl unterschiedlicher Anwendungen ausgelegt. Was sind die wichtigsten Faktoren, die bei der Auswahl eines Lieferanten zu berücksichtigen sind? Bei der Suche nach Lieferanten sind einige wichtige Faktoren zu beachten. Der wichtigste Faktor ist die Qualität des Produkts des Lieferanten....
Einzelheiten anzeigen -
2023-4-16
AC-DC-Wandler: Umwandlung von Wechselstrom in Gleichstrom
An AC-DC converter is an electrical device that converts alternating current (AC) to direct current (DC). This process is necessary for a wide range of electrical devices, from simple battery-powered devices to complex electronic systems. The process of converting AC to DC involves several stages. The first stage is rectification, which involves converting the AC signal to a pulsating DC signal. This is done using a diode or a bridge rectifier, which allows current to flow in only one direction. The second stage is filtering, which involves smoothing out the pulsating DC signal to produce a more constant DC voltage. This is done using a capacitor, which charges up during the peaks of the pulsating DC signal and then discharges...
Einzelheiten anzeigen -
2024-6-29
Choose high-quality power modules to extend the life of your equipment
With the increasing popularity of modern electronic devices, the power module is the "heart" of the device, and its quality is directly related to the performance and life of the device. Therefore, it is very important to choose a high-quality power module. High-quality power modules usually use advanced manufacturing processes and high-quality raw materials to ensure their stability and reliability. Such power modules can not only provide stable and pure power output to the equipment, but also effectively resist external disturbances such as voltage fluctuations and current surges to ensure the normal operation of the equipment. The benefits of choosing high-quality power modules go far beyond this. Since high quality power modules have higher efficiency and lower power consumption, they...
Einzelheiten anzeigen -
2023-7-2
AC-DC Power Supply: Bridging the Gap Between Alternating and Direct Current
Introduction In the world of electrical engineering, power supply plays a crucial role in ensuring the smooth functioning of various electronic devices. One such power supply that bridges the gap between alternating current (AC) and direct current (DC) is the AC-DC power supply. This article aims to provide an in-depth understanding of AC-DC power supply, its working principle, and its applications in different industries. Working Principle of AC-DC Power Supply AC-DC power supply converts the input AC voltage into a DC voltage suitable for electronic devices. The conversion involves three stages: rectification, filtering, and voltage regulation. The first stage, rectification, is achieved using diodes. Diodes allow the flow of current in one direction and block it in the opposite direction....
Einzelheiten anzeigen -
2023-4-26
AC-DC Converter Module: Efficient Power Conversion Solution
AC-DC Converter Module: Efficient Power Conversion SolutionAn AC-DC converter module is an electronic device that converts alternating current (AC) to direct current (DC). It is a vital component in many electronic devices, including computers, televisions, and power supplies. The module is designed to provide efficient power conversion solutions that improve device performance and reduce energy consumption.The AC-DC converter module is a complex device that comprises several stages of power conversion. The first stage is the rectification stage, where the AC input is converted to a pulsating DC signal. The pulsating DC signal is then passed through a filter to remove any residual AC ripple. The filtered signal is then fed to a DC-DC converter, which further smoothes and regulates the...
Einzelheiten anzeigen -
2023-6-19
Design and Analysis of a Bidirectional DC-DC Converter for Power Electronics Applications
Introduction: Power electronics has become an integral part of many electrical systems. It is used to manage power, convert power from one form to another, and distribute power. One of the most commonly used power electronics devices is the DC-DC converter. A DC-DC converter is an electronic circuit that converts a DC voltage level from one level to another. In this paper, we will discuss the design and analysis of a bidirectional DC-DC converter that can be used in power electronics applications. Design: The bidirectional DC-DC converter consists of two parts: a buck converter and a boost converter. The buck converter is used to step down the input voltage, and the boost converter is used to step up the output...
Einzelheiten anzeigen