noticias
Cómo elegir la fábrica del convertidor DC-DC, cómo elegir el convertidor DC-DC de alta calidad
Autor： Módulo de potencia ZYG Time： 2022-9-16
What is a DC-DC converter?
A DC-DC converter, also known as a DC-DC converter or DC transformer, is a circuit or electromechanical device that converts electrical energy. It can convert direct current (DC) power to DC power (or approximate DC) of different voltages. Its power ranges from very low (small batteries) to very high (high voltage power transfer). The output voltage of some DC-DC converters has the same reference point as the input voltage, while the output voltage of some DC-DC converters is isolated from the input voltage.
DC-DC Converter Inductor Selection
The process of selecting an inductor for a DC-DC converter depends on many parameters. Depending on the power levels involved, these inductors can be quite large and may need to be designed for your system. In addition to the required area, the following specifications are also important. You need to consider the choice of DC-DC converter electrical sensors:
Rated current and coil resistance. The coil itself will have some DC resistance, which will generate heat and reduce some voltage across the inductance. Coil resistance should be as low as possible to prevent power loss. Also, the current rating will depend on the physical size of the inductor package; winding sensors are used for high power converters, while foil electric motors can be used for low power converters.
saturation current. Ferrite sensors will have some saturation current, which will saturate the core than saturation current sensors. This will cause the next switching cycle to lag. The inductor should be chosen so that the saturation current is greater than the maximum current required by the system.
inductance and frequency. All components have parasitic effects. Parasitic capacitances between windings and coil resistances can cause the system to self-resonate. In fact, the self-resonant frequency of the inductor is usually very high, so it doesn’t matter unless you intend to use a PWM signal with a very fast edge rate and a frequency around MHz.
DC DC Converter Inductor Selection and Inductor Type
Finally, and least important is the inductance value. The required inductor value depends on the topology you use, as this will determine the function the DC-DC converter needs to perform.
informacion relevante
-
2023-10-13
Fully Modular Power Supply: The Key to Efficient Cable Management
Efficiency is the key to success. This holds true for many aspects of our lives, including cable management in our electronic devices. One innovative solution to the tangled mess of cables is the fully modular power supply. A power supply is an essential component of any electronic device, providing the necessary electrical power to make it function. Traditionally, power supplies come with a fixed set of cables that connect to various components within the device. However, this can lead to a multitude of cables snaking through the system, causing impedance in airflow and hindering overall performance. The concept of a fully modular power supply aims to tackle this issue head-on. Unlike its traditional counterparts, a fully modular power supply allows...
Ver detalles -
2023-10-22
Module Power Supply: Ensuring Reliable and Efficient Electrical Power Delivery
Introduction The demand for reliable and efficient electrical power delivery has never been higher. From consumer electronics to industrial machinery, virtually every device relies on a stable and uninterrupted power source. This is where module power supplies come into play. These compact, efficient, and reliable devices ensure the steady flow of electricity to various electronic systems, making them an indispensable component in modern-day power distribution networks. Understanding Module Power Supplies Module power supplies are electronic devices that convert electrical energy from one form to another to ensure the proper functioning of electronic devices. They serve as an interface between the main power supply and the target system by converting and regulating the input voltage to the desired output voltage level....
Ver detalles -
2023-6-16
LED Power Supply: Converting 12V AC to DC
LEDs or Light Emitting Diodes have become a household name in the lighting industry. LED lighting has several benefits over traditional lighting, such as lower energy consumption, longer lifespan, and higher brightness. However, to power these LEDs, we need a power supply that can convert the input AC voltage to a stable and safe DC voltage. In this article, we will discuss the LED power supply and how it converts 12V AC to DC. LED Power Supply The LED power supply is a device that converts the input voltage to a stable DC voltage that can be used to power the LED lighting. The power supply ensures that the voltage and current supplied to the LEDs are constant, preventing them...
Ver detalles -
2023-7-4
Bidirectional DC-DC Converter: An Efficient Solution for Power Conversion and Energy Management
Introduction: The rapid growth of renewable energy sources and the increasing demand for efficient energy management have led to the development of advanced power conversion systems. Among them, bidirectional DC-DC converters have emerged as a promising solution for effective power conversion and energy management. This article explores the features, applications, and advantages of bidirectional DC-DC converters. 1. Key Features of Bidirectional DC-DC Converters: Bidirectional DC-DC converters are capable of transferring power bidirectionally between two energy sources or energy storage systems. They can convert energy from a high voltage source to a low voltage source or vice versa. These converters efficiently manage energy flow in both directions, enabling energy storage, grid integration, and seamless transition between power sources. 2. Applications of...
Ver detalles -
2023-8-5
China SM Series: AC DC Power Supply for Optimal Performance and Reliability
Introduction In today's fast-paced and technologically driven world, the demand for efficient and reliable power supplies has never been greater. Whether it's for consumer electronics, industrial machinery, or medical equipment, a high-quality AC DC power supply is essential for optimal performance. One such power supply series that stands out in terms of performance and reliability is the SM Series. Overview of the SM Series The SM Series AC DC power supply is a state-of-the-art product line designed and manufactured by leading power supply company. It is renowned for its superior performance, exceptional reliability, and cutting-edge features. The series includes a wide range of models with varying power outputs, making it suitable for a diverse range of applications. Key Features and...
Ver detalles -
2023-7-27
Creating a Custom Type Power Series: Unlocking the Potential of English Learning
English has become a vital tool for communication in today's globalized world. Whether for personal or professional reasons, many individuals are eager to master this language. However, traditional English learning methods often fail to cater to the specific needs and preferences of learners. It is in this context that the concept of a custom type power series emerges, offering a personalized and effective approach to English language acquisition. A custom type power series is a carefully designed learning program that takes into account the unique characteristics and strengths of each learner. It focuses on tailoring the content, pace, and delivery methods to meet the individual's specific learning needs. By doing so, it maximizes the learner's potential and ensures a more...
Ver detalles