¿Cómo elegir la autorización de calidad y los fabricantes de módulos de potencia confiables?
Hogar - Blog - Noticias de la Industria - Cómo resolver el problema de la selección del módulo de potencia

Cómo resolver el problema de la selección del módulo de potencia

Autor: Módulo de potencia ZYG Time: 2022-12-20

It is not easy to select a power module. There are many difficulties to consider. How much do you know?

Magnetic beads, capacitors, diodes, resistors… all have similar inside stories, but people don’t pay much attention to them. There are various topologies of power modules, such as flyback, forward, push-pull, half-bridge, and full-bridge. Due to their different basic principles, each of them is mainly manifested in the advantages at the level of certain characteristic indicators.

The flyback power supply does not have a time period for charging and discharging the battery during the power switch period. That is because there is no time characteristic of the response characteristic, and the grain baud cannot be guaranteed to be very good, although it may not help much according to the energy storage capacitor , but the rationale is just a flaw.

Leakage inductance is also a big problem, but its advantages are simple power supply circuit, low cost, light weight, no need to add magnetic calibration windings, and a wider operating voltage range for typing. Because of this, its share of the total power supply sales market is about 7%.

 

 

The output voltage of the positive power supply has good transient operation characteristics and strong load capacity, but its disadvantages are also obvious. The large energy storage technology is used to filter the inductor and the freewheeling diode, which is large in size, and the back electromotive force of the primary coil of the transformer is high. .

The push-pull power supply has high transient response time, good working voltage and frequency characteristics. It is the most utilized power transformer of all topologies. No flux leakage, simple optocoupler circuit.

If the two forward converters are not completely symmetrical or balanced, the bias magnetism accumulated after many cycles will cause the magnetic core to enter a saturated state, resulting in excessive excitation current of the high-frequency transformer, and even damage the power switch tube.

The accumulative chainless power supply transformer has a large power and high working efficiency, the withstand voltage test value of the power switch tube is relatively low, and the primary coil of the transformer only needs to be wound once. The disadvantage is that the efficiency is low, there is a semiconductor area, and the consumption is large.

The above problems are all caused by the inherent advantages and disadvantages of its topology. Although people can use the power module as the black box of the aircraft, this is also a point that needs to be paid attention to when choosing a power supply.

Etiquetas:

informacion relevante

  • 2023-7-11

    24V AC to DC Converter: Efficient Power Conversion for Versatile Applications

    Introduction: In today's technologically advanced world, power conversion plays a crucial role in various applications across industries. One important aspect of power conversion is the conversion from alternating current (AC) to direct current (DC). This article focuses on the 24V AC to DC converter, which is widely used for its efficiency and versatility in a multitude of applications. Efficiency of 24V AC to DC Converter: Efficiency is a crucial factor when it comes to power conversion. The 24V AC to DC converter is known for its high efficiency, ensuring minimal energy loss during the conversion process. This efficiency is achieved through the use of advanced components and robust circuitry that efficiently convert AC power to a stable DC output. With...

    Ver detalles
  • 2023-9-29

    DC to DC Step-Down Adjustable Power Supply Module: Enhancing Voltage Regulation Efficiency

    Introduction The demand for efficient and reliable power supply modules is increasing continuously. The DC to DC step-down adjustable power supply module is a vital component in various electronic devices, including smartphones, laptops, and IoT devices. This article explores the importance of voltage regulation efficiency in these power supply modules and how it can be enhanced to meet the growing demands of the industry. Importance of Voltage Regulation Efficiency Voltage regulation refers to the ability of a power supply module to maintain a constant output voltage regardless of input fluctuations or load variations. It is an essential characteristic as most electronic devices require a stable and precise voltage supply to function correctly. A slight deviation in the output voltage can...

    Ver detalles
  • 2023-11-25

    DC Power Supply Module: Unleashing Reliability and Efficiency in Electrical Systems

    The efficiency and reliability of these systems are crucial, and one essential component that contributes significantly to achieving these qualities is the DC power supply module. This article will explore the importance of DC power supply modules, their benefits, and their impact on electrical systems. Unleashing Reliability: Reliability is a key factor in any electrical system. DC power supply modules are designed to provide a stable and constant output voltage, ensuring that the connected devices receive the required power consistently. This stability prevents voltage fluctuations that could potentially damage sensitive components and disrupt the system\'s functionality. With a reliable power supply, the risk of unexpected shutdowns or malfunctions is significantly reduced, leading to improved system performance and increased uptime. Efficiency...

    Ver detalles
  • 2023-7-22

    AC DC Converter HP Series made in chian: Efficient Power Conversion for All Your Electrical Needs

    Introduction: In today's fast-paced world, electricity plays a crucial role in powering various devices and equipment. However, the power supply available from the grid is often alternating current (AC), which may not be compatible with many electronic devices that require direct current (DC). To bridge this gap and ensure a smooth, efficient power conversion, the AC DC Converter HP Series provides a reliable and versatile solution for all your electrical needs. Efficient Power Conversion: The AC DC Converter HP Series is designed to provide efficient power conversion, ensuring that the electrical energy is converted from AC to DC with minimal losses. This efficiency is achieved through advanced technologies and high-quality components used in the converter's construction. By maximizing the conversion...

    Ver detalles
  • 2023-6-26

    “AC DC Power Supply SD Series”

    The AC DC Power Supply SD Series is a vital component for numerous electronic devices and equipment. It is a type of power supply that converts AC or alternating current into DC or direct current. This power supply is widely used in various applications, such as computers, telecommunications, medical equipment, and industrial automation. The AC DC Power Supply SD Series is known for its efficiency and reliability. It has a high power factor that helps reduce energy consumption. With a compact design, it can fit into small spaces and can be easily integrated into different systems. This power supply has a low noise level and excellent stability, ensuring a steady supply of power to the equipment. One of the key...

    Ver detalles
  • 2023-10-27

    Versatile Adjustable Power Supply Module: The Ultimate Solution for Your Electrical Needs

    Introduction: Having a reliable and versatile power supply is crucial for various applications. Whether you are an electronics hobbyist, a professional engineer, or a student working on projects, having a power supply that can cater to your specific electrical needs is essential. Thankfully, the Versatile Adjustable Power Supply Module is here to meet your demands and provide you with the ultimate solution. Key Features: 1. Adjustable Voltage and Current Output: One of the standout features of this power supply module is its ability to adjust both voltage and current output. With a voltage range of 0-30V and a current range of 0-10A, you can easily tailor the power supply to match the requirements of your specific electrical devices or circuits....

    Ver detalles

Más de 6000 opciones, soluciones integrales de fuentes de alimentación