ニュース
Module power supply: efficient and reliable power supply solution
著者： ZYGパワーモジュール Time： 2024-11-25
Module power supply, also known as power module, board mounted power supply, is a power supply that can be directly mounted on a printed circuit board. The following is a detailed introduction to module power supply:
1. Main features
Simple design: Module power supply is usually equipped with standardized front end, highly integrated power module and other components. When in use, only one power module is needed, with a small number of discrete components, to obtain power supply, which simplifies the power supply design.
Shorten the development cycle: Module power supply generally has a variety of input and output options. Users can repeat or cross-stack as needed to form a building block combination power supply, realize multi-channel input and output, thereby reducing the prototype development time.
Flexible changes: If the product design needs to be changed, just convert or parallel another suitable power module.
Standardized packaging: The module power supply shell has a trinity structure of heat sink, radiator and shell, which realizes the conduction cooling method of the module power supply, makes the temperature value of the power supply close to the minimum value, and gives the module power supply standardized packaging.
High quality and reliability: Module power supply is generally fully automated and equipped with high-tech production technology, with stable and reliable quality.
Combinability: The module power supply can be combined according to actual needs to achieve flexibility and scalability, which is convenient for users to combine and upgrade according to their needs.
Efficiency: The module power supply adopts advanced power conversion technology, which can achieve efficient energy conversion and utilization, and reduce energy loss and waste.
2. Main advantages
High reliability: Each module of the module power supply is independent, and can be replaced separately when a fault occurs, without affecting the operation of the entire system. At the same time, the module power supply can use redundant design to improve the reliability and stability of the system.
High power density: The module power supply emphasizes the standardization of packaging, and the product has the characteristics of small, thin and light, which can greatly improve the power density.
Good maintainability: The module power supply is maintainable, and a single module can be quickly replaced when it fails, shortening the maintenance time and improving the availability and stability of the equipment.
3. Product classification
According to the application field of modern power electronics, the module power supply can be divided as follows:
Green module power supply: refers to the high-efficiency and energy-saving power supply related to green computers. Green computers generally refer to personal computers and related products that are harmless to the environment, while green power supplies improve power efficiency to reduce power consumption.
High-frequency switching power supply: High-frequency miniaturized switching power supplies and their technologies have become the mainstream of modern communication power supply systems. In the field of communications, rectifiers are usually called primary power supplies, while DC/DC converters are called secondary power supplies.
DC/DC converters: convert a fixed DC voltage into a variable DC voltage. This technology is widely used in stepless speed change and control of trolleybuses, subway trains, and electric vehicles.
Uninterruptible power supply (UPS): a highly reliable and high-performance power supply required for computers, communication systems, and occasions that require uninterrupted power.
Inverter power supply: mainly used for variable frequency speed regulation of AC motors, it occupies an increasingly important position in electrical transmission systems and has achieved huge energy-saving effects.
In addition, module power supplies can also be subdivided into general module power supplies, railway module power supplies, aerospace and military module power supplies, and thick film process power supplies, which are used in different downstream industries.
In summary, as an important component of electronic equipment, module power supplies have broad application prospects and huge market potential. With the continuous advancement of technology and the continuous expansion of application fields, module power supplies will become more intelligent, efficient, and reliable, providing more reliable guarantees for the stable operation of electronic equipment and systems.
前： New Energy High Voltage Power Supply: Efficient and Stable Green Power
次： Special power supply: customized energy solutions that empower high-tech fields
関連情報
-
2023-4-25
電気機器への電力供給に関しては、主に AC と DC の 2 種類の電源があります。 ACは交流を表し、DCは直流を表します。どちらのタイプの電源にも、特定の用途と用途があります。デバイスに適したタイプの電源を選択するには、この 2 つを区別することが重要です。 AC 電源と DC 電源の主な違いは、電流の流れ方です。 AC 電源では、電流は正弦波パターンで交互に行き来します。これは、電流が定期的に方向を変えることを意味します。直流電源では、電流はプラス端子からマイナス端子へ一方向にしか流れません。
詳細を見る -
2023-5-13
Car AC-DC Converter – Power Your Devices on the Go
Are you tired of running out of battery on your phone or other electronic devices while on a road trip? If so, then a car AC-DC converter may be just what you need. This device allows you to plug in your devices and charge them while you're traveling in your car. How does it work? A car AC-DC converter is a small device that plugs into your car's cigarette lighter socket. It then converts the DC power from your car's battery into AC power that can be used to charge your electronic devices. This can include anything from phones and tablets to laptops and cameras. What are the benefits? The main benefit of using a car AC-DC converter is that...
詳細を見る -
2023-8-29
The Electric Power Series: Illuminating the World with Energy
Introduction Electricity has become an indispensable part of our daily lives, powering our homes, industries, and even transportation. The Electric Power Series plays a crucial role in illuminating the world with energy. In this article, we will explore the significance of electric power and its impact on various aspects of our lives. 1. The Evolution of Electric Power Electric power has come a long way since its discovery in the late 18th century. The invention of the electric battery by Alessandro Volta and the development of the electric generator by Michael Faraday revolutionized the world. These breakthroughs laid the foundation for the widespread use of electricity. Thomas Edison\'s invention of the practical incandescent light bulb in 1879 marked a major...
詳細を見る -
2023-5-14
Converting 110V AC to 12 Volt DC: A Step-by-Step Guide
Converting 110V AC to 12 Volt DC: A Step-by-Step Guide Converting 110V AC to 12 Volt DC is a process that is commonly used in various electronic devices such as radios, televisions, and computers. The process is simple and straightforward, but it requires the use of certain tools and equipment. In this guide, we will take you through the process of converting 110V AC to 12 Volt DC. Step 1: Gather the Required Tools and Equipment To begin with, you will need certain tools and equipment to convert 110V AC to 12 Volt DC. The following are the tools and equipment that you will require: - A transformer - A rectifier - A capacitor - A voltage regulator - A...
詳細を見る -
2023-9-26
Highly Efficient and Reliable 750W Modular Power Supply for Enhanced Performance
Introduction A reliable and efficient power supply is essential for the seamless operation of electronic devices. One such power supply that stands out from the rest is the Highly Efficient and Reliable 750W Modular Power Supply. This power supply is designed to enhance performance and ensure a stable and consistent power supply to your system. With its modular design and high efficiency, it is a perfect choice for gamers, PC enthusiasts, and professionals who demand nothing less than the best. Efficiency and Performance The Highly Efficient and Reliable 750W Modular Power Supply boasts an impressive efficiency of up to 90%, which means that it converts up to 90% of the input power into usable output power. This level of efficiency...
詳細を見る -
2024-1-2
DC to DC Step-Down Adjustable Power Supply Module: Regulate Voltage with Precision
In today's fast-paced world, technology has become an integral part of our lives. From smartphones to laptops, we rely heavily on electronic devices to perform various tasks. However, these devices require a stable power supply to function optimally. This is where the DC to DC Step-Down Adjustable Power Supply Module comes into play. The DC to DC Step-Down Adjustable Power Supply Module is a compact and versatile device that allows users to regulate voltage with precision. Whether you are an electronics enthusiast or a professional working in the field, this power supply module can prove to be an invaluable tool. One of the key features of this module is its ability to step down voltage. It can convert a higher...
詳細を見る