Новости
Представление китайских производителей модулей питания малого размера
Автор：Модуль питания ZYG Time： 2022-5-5
When we choose a power module, we generally look at the quality of the input, output, ripple, breakdown, temperature, certification, and other characteristics of the power supply. Apart from these, we can also judge according to the following points.
1. Circuit principle and soldering process The bare board can use intuitive methods, such as a neat layout of components and potting modules without being exposed and unable to view the internal situation. The quality of the mechanized wave soldering process is better than manual soldering, generous, but Better in terms of safety and performance
2. The core of the power supply of chip components and transformer components is IC, which will directly affect the power and high-temperature resistance of the entire power transformer components. . Responsible for accomplishing AC-DC and saturating the fryer during energy overload.
3. Is it an electrolytic capacitor or a ceramic capacitor?
1）. The electrolytic capacitor is a temperature-sensitive component after the electrolyte heats up and explodes.
2）. Ceramic capacitors are mainly non-polar, and the switching frequency will cause the parasitic resistance of the capacitor to heat up. Good dielectric materials and capacity should not be too large. Most, it is widely used in high-frequency circuits.
4. Batch testing of aging and high-temperature aging No matter how good the quality stability of product materials and production process control is and whether the materials have potential safety hazards, aging needs to be detected. Only through power aging and high-temperature pumping detection.
The benefits of choosing a China Small size power module manufacturers
Power savings of up to 25% can be achieved with these new power switches, and the reduction in power consumption brings many improvements. On the one hand, the heat dissipation design of the heat sink and the overall module can be more compact and have higher cost performance. Providing the same output power but with a smaller product is an important advantage, especially in pump or fan designs. In general, by using smaller electronic drives, controlled motors can be used in applications that were not possible before. Also, reduced use of production materials means lower costs for production, transportation, and recycling, which all boil down to product life cycle costs.
On the other hand, the maximum output power can be increased while maintaining the consistency of the existing design parameters. Products that use the same thermal design but consume less power have higher reliability, because there is a less thermal excursion, and the failure rate is greatly reduced. Moreover, the same design can evolve into a variety of different models by simply replacing different output power chips, thereby shortening the time to market.
We have more modules with different powers, if you want to know more, please contact us.
Предыдущий: На какие детали нужно обратить внимание при настройке силовых модулей?
Следующий: Каковы советы по выбору модуля питания постоянного/постоянного тока?
релевантная информация
-
2023-6-5
SD Series AC DC Power Supply: Reliable and Efficient Solution for Your Power Needs
With the advancements in technology and the increasing demand for electronic devices, having a reliable and efficient power supply is crucial. The SD Series AC DC power supply is a top-choice for professionals and businesses who require a safe and stable source of power for their devices. The SD Series AC DC power supply is a compact and versatile power supply that offers a wide range of features and benefits. It is designed to meet the demanding needs of various applications such as telecommunications, medical equipment, laboratory instruments, and industrial machinery. The power supply is equipped with advanced features such as overvoltage protection, overcurrent protection, short-circuit protection, and over-temperature protection, ensuring the safety and protection of your devices in any...
Посмотреть детали -
2023-4-15
An AC-DC converter is an electrical device that converts alternating current (AC) power to direct current (DC) power. This is a critical component in many electronic devices, as most electronics require DC power to operate, but AC power is typically what is delivered from wall outlets. The process of converting AC power to DC power involves a few key components. The first component is a transformer, which steps down the voltage of the incoming AC power to a lower level. This is necessary because many electronics require lower-voltage DC power to operate. After the transformer steps down the voltage, the AC power is then rectified. This means that the AC power is converted to pulsating DC power. This pulsating DC...
Посмотреть детали -
2023-7-13
Car Outlet Converter: Power Your Devices on the Go!
In today's fast-paced world, staying connected is more important than ever. Whether it’s for work or leisure, we rely heavily on our electronic devices to keep us informed, entertained, and productive. However, one of the biggest challenges we face is keeping our devices powered up, especially when we are on the go. Thankfully, with the introduction of car outlet converters, that challenge is now a thing of the past. A car outlet converter is a device that allows you to convert the DC power from your car’s cigarette lighter socket into AC power, which can then be used to power or charge your electronic devices. This small yet powerful gadget has revolutionized the way we use our devices while on...
Посмотреть детали -
2023-7-9
Introducing the Advanced DC DC Converter EX Series
In the ever-evolving world of electronics, the demand for efficient power conversion solutions continues to rise. Companies are constantly looking for advanced technologies that can provide reliable and high-performance power conversion in a compact form factor. And that is where the Advanced DC DC Converter EX Series comes in. The Advanced DC DC Converter EX Series is a groundbreaking lineup of power converters designed to meet the diverse needs of various industries. With cutting-edge technology and innovative design, this series offers unparalleled performance and flexibility. One of the key features of the Advanced DC DC Converter EX Series is its high efficiency. These converters boast an efficiency of up to 95%, ensuring minimal power loss and maximum energy utilization. This...
Посмотреть детали -
2023-6-1
Power Up with the SP Series AC DC Converter
The demand for power has increased rapidly over the years, and with it, the need for reliable and efficient power converters. In today\'s world, we rely on electronics for almost everything, and we need a constant and stable power supply to keep them running smoothly. This is where the SP Series AC DC converter comes in. The SP Series AC DC converter is a high-performance power supply that converts AC power to DC power. It is designed to meet the demands of a wide range of applications, from industrial automation to medical equipment. The SP Series offers a wide range of output voltages and power ratings, making it a versatile solution for various power requirements. One of the key features...
Посмотреть детали -
2023-12-4
The Ultimate Guide to Choosing the Best 750W Modular Power Supply
In today's world, where technology consumes a significant part of our lives, having a reliable power supply is crucial. Whether you are a gamer, a graphic designer, or a computer enthusiast, having a power supply that can handle your system's needs is essential. One popular choice for most systems is a 750W modular power supply. In this guide, we will explore everything you need to know to choose the best 750W modular power supply for your setup. Understanding the Basics: Before diving into the specifics, it is essential to understand the basics of a modular power supply. Unlike traditional power supplies, modular power supplies allow you to detach or rearrange the cables according to your requirements. This feature not only...
Посмотреть детали