About China AC-DC Power Supply factory

An AC-DC power source is a power source that converts alternating current from the grid into the direct current needed to power most electronic devices. From transportation and industrial markets to consumer and IoT applications, AC-DC power supplies are integral components in the systems that make the world go round.

ทำไมครัวเรือนไม่ใช้ไฟฟ้ากระแสตรง?
Direct current is not used in the home because for the same voltage value, direct current is more lethal than alternating current because direct current does not pass through zero. Electrolytic corrosion is more of a problem with direct current. DC inductors are more complicated. It requires commutators, electronic switches and brushes.

It is advisable to avoid any form of electric shock, but in these cases, direct current is considered safer because the body’s threshold for direct current is much higher than its threshold for alternating current.

เรียนรู้เพิ่มเติม
ประเทศจีน แหล่งจ่ายไฟ AC-DC โรงงาน
ประเทศจีน แหล่งจ่ายไฟ AC-DC โรงงาน
แอปพลิเคชัน
ล่าสุด บล็อก
ดูเพิ่มเติม
AC and DC power modules: stable, efficient and reliable energy heart

2024-3-5

In modern electronic equipment, power modules play a vital role. As a senior technology enthusiast, I have an in-depth understanding and strict requirements for power modules. Today, I would like to share with you an AC/DC power module that I am particularly satisfied with recently. With its stable, efficient, and reliable characteristics, it has become an indispensable energy heart in many of my electronic devices. ensure continuous operation of equipment For any electronic device, a stable power supply is crucial. This AC and DC power module uses advanced power management technology and high-quality electronic components to ensure the stability and reliability of the power output. During use, I never encountered any problems with power fluctuations or interruptions, which gave me full confidence in this power module. save energy, reduce consumption and reduce operating costs In addition to stability, high performance is also an important consideration for me in power modules. This AC and DC power module adopts a high-efficiency circuit design to minimize energy waste and heat generation. In actual use, I found that its energy consumption is much lower than similar products, which not only helps reduce operating costs, but also contributes to environmental protection. meet diverse needs As...
AC-DC Converter Module: Turning Alternating Current to Direct Current

2023-5-6

An AC-DC converter module is an electrical device used to convert alternating current (AC) to direct current (DC). It is an essential component of many electronic devices, such as computers, televisions, and mobile phones. The module is also used in industrial settings, where it is used to power various equipment. The module works by taking the AC power supply and converting it into a DC output. This process involves several stages, including rectification, filtering, and regulation. Let's take a closer look at each of these stages. Rectification The first stage of the AC-DC converter module is rectification. In this stage, the AC supply is transformed into a pulsating DC voltage. This is done using a diode bridge, which consists of four diodes arranged in a specific pattern. The diode bridge allows current to flow in one direction only, effectively converting AC to DC. However, the DC output at this stage is still not smooth and requires further processing. Filtering The second stage of the AC-DC converter module is filtering. In this stage, the pulsating DC voltage is smoothed out using a capacitor. The capacitor acts as a filter, removing any fluctuations in the DC output and providing a steady current....
Industrial AC-DC Converter for Reliable Power Conversion

2023-5-8

An industrial AC-DC converter is an essential component in many industrial applications where reliable power conversion is required. These converters are designed to convert AC power into DC power that can be used to power a wide range of industrial equipment and machinery. The use of an industrial AC-DC converter ensures that the power supply is stable and reliable, ensuring that the industrial equipment operates efficiently and effectively. In many industrial applications, the power supply can be unstable, and this can cause a range of problems. For example, if the voltage fluctuates, it can cause the equipment to malfunction or even fail completely. This can result in costly downtime and repairs, which can negatively impact the productivity and profitability of the industrial operation. By using an industrial AC-DC converter, the power supply is stabilized, ensuring that the equipment operates at a consistent level, reducing the risk of equipment failure. Industrial AC-DC converters come in a range of sizes and configurations, depending on the specific requirements of the industrial application. Some converters are designed for use in harsh environments, such as those found in mining or oil and gas operations. These converters are often rugged and durable, able to withstand extreme...
Efficient AC to DC Converter for LED: Transforming 12V AC Power into DC for Enhanced Lighting

2023-7-22

Introduction: In recent years, there has been a significant rise in the popularity and demand for LED lighting due to its energy efficiency and longer lifespan. However, LEDs require DC (direct current) power to operate, while the standard power supply in most homes and offices is AC (alternating current). Therefore, an efficient AC to DC converter is necessary to transform the 12V AC power into DC for enhanced lighting. This article explores the importance of such a converter and its benefits in the field of LED lighting. Understanding AC and DC Power: Before delving into the details of AC to DC conversion, it is crucial to understand the fundamental differences between AC and DC power. AC power, or alternating current, is the standard electrical output provided by power companies. It is characterized by its ability to change direction periodically, typically at a frequency of 50 or 60 Hz. On the other hand, DC power, or direct current, flows consistently in one direction, without any change in polarity or magnitude. The Need for an AC to DC Converter: As mentioned earlier, LEDs require DC power to operate efficiently. Without an AC to DC converter, attempting to power an LED directly with...
Bidirectional DC DC Converter: A Two-Way Power Transfer Solution

2023-6-12

A bidirectional DC-DC converter is a power transfer solution that allows for two-way power conversion between two different voltage levels. This type of converter is commonly used in applications where power needs to be transferred bidirectionally, such as in electric vehicles, renewable energy systems, and battery charging systems. The bidirectional DC-DC converter is a device that converts power from a high voltage level to a low voltage level, or vice versa, depending on the direction of power flow. This is achieved by using a combination of power switches, inductors, capacitors, and control circuitry. The converter operates in two modes: buck mode and boost mode. In buck mode, the converter steps down the voltage from the high voltage level to the low voltage level. In boost mode, the converter steps up the voltage from the low voltage level to the high voltage level. The direction of power flow determines which mode the converter operates in. The bidirectional DC-DC converter has several advantages over other power transfer solutions. One of the main advantages is its efficiency. The converter is designed to minimize power losses and maximize power transfer efficiency, which results in less energy wasted and more energy transferred between the two...
Bidirectional DC-DC Converter: Efficient Power Conversion in Both Directions

2023-7-1

Introduction In recent years, there has been a significant increase in the demand for bidirectional power conversion systems. These systems allow power to flow in both directions, enabling efficient energy transfer between different sources and loads. One crucial component of such systems is the bidirectional DC-DC converter. This article will delve into the working principle and advantages of the bidirectional DC-DC converter, highlighting its role in achieving efficient power conversion. Working Principle A bidirectional DC-DC converter is a power electronic device that converts direct current from one voltage level to another, while also allowing power flow in both directions. It consists of two main parts: an input stage and an output stage. The input stage typically consists of an active rectifier, which rectifies the input voltage, and a boost converter, which steps up the voltage as required. The output stage comprises a buck converter, which steps down the voltage, and an inverter, which converts DC to AC if needed. When power flows from the input to the output, the active rectifier and the boost converter work together to increase the voltage level. This configuration allows efficient power transfer from a lower voltage source to a higher voltage load. On the...
24V AC to DC Converter manufacture: Efficient and Reliable Solution for Power Conversion

2023-7-28

Power conversion plays a vital role in various industries and applications, from electronics and telecommunications to renewable energy systems. In these systems, the conversion of alternating current (AC) to direct current (DC) is essential for proper functioning. One efficient and reliable solution for this conversion is the 24V AC to DC converter. The 24V AC to DC converter is specifically designed to convert the 24V alternating current to a stable and regulated direct current output. It is widely used in a range of applications such as industrial automation, control systems, power supplies, and battery charging. This converter offers several benefits and features that make it an ideal choice for power conversion. Efficiency is a crucial factor when it comes to power conversion. The 24V AC to DC converter is designed to operate with high efficiency, minimizing energy losses during the conversion process. With its advanced circuitry and components, it can achieve conversion efficiencies of up to 90%, ensuring that a large portion of the input power is efficiently converted into the desired output. Reliability is another essential aspect of power conversion. The 24V AC to DC converter is built to provide a stable and reliable output under varying load conditions...
Transforming 12V AC to DC for LED Lights: A Reliable Converter Solution

2023-8-8

LED lights have gained immense popularity in recent years due to their energy efficiency and longer lifespan compared to traditional incandescent bulbs. However, unlike incandescent bulbs, which operate on an alternating current (AC), LED lights require a direct current (DC) power source to function properly. This poses a challenge for many individuals and businesses who want to switch to LED lighting but have existing AC power systems in place. To address this issue, a reliable and efficient converter solution is needed to transform the 12V AC power to the necessary 12V DC power for LED lights. In this article, we will explore the importance of such a converter and discuss the benefits it offers. One of the key advantages of using a converter to transform AC to DC for LED lights is the enhanced safety it provides. LED lights operate at low voltage, making them safer than incandescent bulbs. However, if the AC voltage is directly supplied to the LED lights, it can cause damage or even a safety hazard. The converter acts as a protective barrier, ensuring that only the appropriate DC voltage is delivered to the LED lights, eliminating the risk of electrical accidents. Furthermore, a reliable converter...
Modular Power Supply: Efficient and Stable Power Supply Solution

2024-8-24

In the booming development of electronic equipment, modular power supply, as an important part of power supply, has gained wide recognition and application with its high efficiency, stability and convenience. This article will deeply analyze the unique charm of this power supply solution from three aspects: the definition and classification of modular power supply, the working principle and advantages. 1. Definition and Classification of Modular Power Supply As the name suggests, modular power supply is a power supply that can be mounted directly on a circuit board. It belongs to a large category of power supply products, which mainly includes two categories: AC/DC modular power supply and DC/DC modular power supply. AC/DC modular power supply is mainly responsible for converting AC voltage into DC voltage to meet the device's DC power requirement, while DC/DC modular power supply further converts DC voltage to adapt to different voltage and current requirements of different devices. This modular design makes the power supply more flexible and efficient. 2. Working Principle of Modular Power Supply The working principle of modular power supply is relatively complex, but the core lies in the conversion and stabilization of voltage. First, the input voltage is first converted by the...
วิธีเลือกโรงงาน DC-DC Converter วิธีเลือก DC-DC Converter คุณภาพสูง

2022-9-16

ตัวแปลง DC-DC คืออะไร? ตัวแปลง DC-DC หรือที่เรียกว่าตัวแปลง DC-DC หรือหม้อแปลง DC เป็นวงจรหรืออุปกรณ์ไฟฟ้าที่แปลงพลังงานไฟฟ้า มันสามารถแปลงไฟกระแสตรง (DC) เป็นไฟ DC (หรือ DC โดยประมาณ) ของแรงดันไฟฟ้าที่แตกต่างกัน ช่วงกำลังไฟฟ้ามีตั้งแต่ต่ำมาก (แบตเตอรี่ขนาดเล็ก) ไปจนถึงสูงมาก (การถ่ายเทพลังงานไฟฟ้าแรงสูง) แรงดันไฟขาออกของคอนเวอร์เตอร์ DC-DC บางตัวมีจุดอ้างอิงเดียวกับแรงดันไฟขาเข้า ในขณะที่แรงดันไฟขาออกของคอนเวอร์เตอร์ DC-DC บางตัวแยกออกจากแรงดันไฟฟ้าขาเข้า การเลือกตัวเหนี่ยวนำตัวแปลง DC-DC ขั้นตอนการเลือกตัวเหนี่ยวนำสำหรับตัวแปลง DC-DC ขึ้นอยู่กับพารามิเตอร์หลายอย่าง ตัวเหนี่ยวนำเหล่านี้อาจมีขนาดค่อนข้างใหญ่และอาจต้องได้รับการออกแบบมาสำหรับระบบของคุณ ทั้งนี้ขึ้นอยู่กับระดับพลังงานที่เกี่ยวข้อง นอกจากพื้นที่ที่ต้องการแล้ว ข้อกำหนดต่อไปนี้ก็มีความสำคัญเช่นกัน คุณต้องพิจารณาทางเลือกของเซ็นเซอร์ไฟฟ้าตัวแปลง DC-DC: พิกัดกระแสและความต้านทานของคอยล์ ตัวคอยล์จะมีความต้านทานกระแสตรงอยู่บ้าง ซึ่งจะสร้างความร้อนและลดแรงดันไฟบางส่วนผ่านตัวเหนี่ยวนำ ความต้านทานของคอยล์ควรต่ำที่สุดเพื่อป้องกันการสูญเสียพลังงาน นอกจากนี้ การจัดอันดับปัจจุบันจะขึ้นอยู่กับขนาดทางกายภาพของ...

ตัวเลือกมากกว่า 6000+ โซลูชันการจ่ายไฟแบบครบวงจร