About Small size power module suppliers

Due to technological advancements in many areas, more and more suppliers are offering power modules. Now is the time to take advantage of a new generation of power modules.

The need for higher density circuit boards and reduced system size has driven the need for smaller DC/DC solutions, which has led to the development of power modules.

Power modules are used in power conversion equipment such as industrial motor drives, embedded motor drives, uninterruptible power supplies, AC-DC power supplies, and welder power supplies.

Power modules integrate most of the components required for a power supply (synchronous switching regulator ICs, inductors, resistors, and capacitors) into a compact package. The result is an efficient and compact fully integrated solution that meets EMI requirements and keeps power supply design as simple as possible. Designers can move between modules and ICs as needed to trade off cost, size, and ease of use.

 

เรียนรู้เพิ่มเติม
ซัพพลายเออร์โมดูลพลังงานขนาดเล็ก
ซัพพลายเออร์โมดูลพลังงานขนาดเล็ก
ตัวแปลง AC-DC
ตัวแปลง DC-DC
แหล่งจ่ายไฟ AC-DC
พาวเวอร์ซัพพลายพิเศษ
แหล่งจ่ายไฟ DC-DC
แอปพลิเคชัน
ล่าสุด บล็อก
ดูเพิ่มเติม
AC to DC Converter Module – 12V Output

2023-6-19

Introduction The AC to DC Converter Module is an electronic device used to convert alternating current (AC) to direct current (DC). This module is designed to provide a 12V output that can be used for various purposes. In this article, we will discuss the working principle, applications, and benefits of this module. Working Principle The AC to DC Converter Module consists of a step-down transformer, a rectifier, and a filter capacitor. The AC voltage is first stepped down by the transformer and then rectified by the diodes in the rectifier. The rectified voltage is then filtered by the capacitor to remove any ripples and provide a smooth DC output. The output voltage can be adjusted by changing the turns ratio of the transformer or by using a voltage regulator. Applications The AC to DC Converter Module is used in various electronic devices, such as power supplies, battery chargers, LED drivers, and motor controllers. It is also used in automotive and marine applications to convert the AC voltage from the alternator to DC voltage for charging the battery and powering the electrical systems. This module can be used in DIY projects, robotics, and hobbyist applications that require a stable and regulated...
Fully Modular Power Supply: Ultimate Convenience and Versatility

2023-11-21

In today's fast-paced world, convenience and versatility are highly valued attributes. We constantly seek products that offer us the flexibility to adapt to various situations effortlessly. One such product that has gained popularity in recent years is the fully modular power supply. This innovative technology has revolutionized the way we power our electronic devices, providing us with the ultimate convenience and versatility. So, what exactly is a fully modular power supply? Unlike traditional power supplies, which come with a fixed set of cables, a fully modular power supply allows users to detach and attach cables as needed. This means that you can connect only the cables that are necessary for your specific setup, eliminating the clutter caused by excess cables. Whether you are building a gaming PC or a home theater system, a fully modular power supply offers the freedom to customize your cable management and create a clean and organized setup. The convenience of a fully modular power supply goes beyond cable management. With traditional power supplies, replacing or upgrading cables can be a tedious and time-consuming process. However, with a fully modular power supply, you can easily swap out cables whenever needed. Whether you want to upgrade your...
วิธีต่อสายไฟ ac กับ dc

2023-4-20

Introduction: If you intend to power a device that requires DC power supply, but you only have access to an AC power source, then you need to convert AC to DC. This can be done by using an AC to DC power supply. AC to DC power supply conversion is a relatively simple process, but it requires the proper tools and knowledge. In this guide, we will show you how to wire AC to DC power supply step by step. Step 1: Determine the Power Requirements The first step in wiring AC to DC power supply is to determine the power requirements of your device. You need to know the voltage, amperage, and wattage of the device. For example, if you have a device that requires 12V DC, 1A, and 12W, then you need to look for an AC to DC power supply that can provide at least 12V DC, 1A, and 12W. Step 2: Choose the Right AC to DC Power Supply Once you determine the power requirements of your device, you need to choose the right AC to DC power supply. You can find AC to DC power supplies in various sizes, shapes, and power ratings. When choosing...
12V AC to DC Converter Module supplier: Efficiently Powering Your Devices with Ease

2023-7-24

With the increasing number of electronic devices in our daily lives, the need for efficient power solutions has become essential. One such solution is the 12V AC to DC converter module, which efficiently powers devices with ease. This article will explore the benefits and applications of this converter module. Firstly, let's understand the basics. The 12V AC to DC converter module is designed to convert alternating current (AC) to direct current (DC) with a voltage output of 12 volts. The module consists of various components such as a transformer, rectifier, and filtering circuit. These components work together to ensure a stable and reliable power supply for your devices. The main advantage of using a 12V AC to DC converter module is its efficiency. The module is specifically designed to minimize power loss during the conversion process. This means that a larger percentage of the input power is efficiently converted into the desired output power. As a result, your devices receive a steady and reliable power supply, ensuring their optimal performance. Another benefit of this converter module is its versatility. It can be used in a wide range of applications, including powering electronic devices such as routers, LED lights, security cameras,...
AC-DC Converter: Making the Switch from Alternating to Direct Current

2023-4-13

AC-DC converters, also known as rectifiers, are electronic devices that convert alternating current (AC) to direct current (DC). This is important because most electronic devices, such as computers and televisions, require DC in order to operate. AC-DC converters are used extensively in power supply applications and are a common component in many electronic devices. The process of AC-DC conversion begins with the rectification of the AC signal. Rectification is the process of converting the AC signal into a DC signal by removing the negative portion of the waveform. This is done using a rectifier diode, which allows current to flow in only one direction. The result is a pulsating DC signal that has a voltage equal to the peak value of the AC signal. The pulsating DC signal is then filtered using a capacitor to remove the high-frequency ripples. The capacitor charges when the voltage is high and discharges when the voltage is low, resulting in a smoother DC output. The final output voltage is regulated using a voltage regulator, which ensures that the output voltage remains constant despite fluctuations in the input voltage or load.     AC-DC converters can be classified into two types – uncontrolled and controlled...
120V AC to 12V DC Converter manufacture: Efficient Voltage Conversion for Various Devices

2023-8-12

Introduction: In the world of electronics, voltage conversion is a crucial process that enables devices to function optimally. One such conversion is the transformation of 120V alternating current (AC) to 12V direct current (DC). This article will discuss the importance of efficient voltage conversion and explore the benefits of a 120V AC to 12V DC converter for various devices. Understanding Voltage Conversion: Voltage conversion refers to the alteration of electrical potential between different levels. In the case of a 120V AC to 12V DC converter, the aim is to convert the high voltage alternating current commonly found in power outlets into low voltage direct current suitable for powering electronic devices. This conversion is achieved through a series of electrical components and circuits. Importance of Efficient Voltage Conversion: Efficient voltage conversion is crucial for several reasons. Firstly, it ensures that devices receive the appropriate level of power supply, preventing any potential damage caused by over or under voltage. Secondly, efficient conversion reduces energy wastage, making it an environmentally friendly choice. Lastly, it enhances the overall performance and longevity of electrical devices, as they operate at their intended voltage levels. Benefits of a 120V AC to 12V DC Converter: 1. Versatility: A...
DC-DC Power Supply Module: Efficient and Reliable Solutions for Your Electronic Devices

2023-12-16

In today's fast-paced world, electronic devices have become an integral part of our lives. From smartphones and laptops to electric vehicles and industrial machinery, these devices rely on a stable and efficient power supply to function optimally. DC-DC power supply modules have emerged as reliable solutions that provide efficient power conversion for various electronic devices. In this article, we will delve into the benefits and applications of DC-DC power supply modules, highlighting their importance in powering our modern world. Efficiency and Reliability: One of the key advantages of DC-DC power supply modules is their high efficiency in converting power from one voltage level to another. Traditional linear power supplies often suffer from significant power losses due to the use of linear regulators. However, DC-DC power supply modules utilize switching regulators that offer higher efficiency and reduced power dissipation. This not only ensures a more efficient use of energy but also leads to lower heat generation, resulting in increased reliability and longevity of the electronic devices. Moreover, DC-DC power supply modules are designed to handle a wide range of input voltage levels, allowing them to adapt to different power sources. This flexibility makes them suitable for use in diverse applications, ranging...
ZP Series: An AC DC Converter for Efficient Power Conversion

2023-7-5

Introduction: In today's technologically advanced world, efficient power conversion plays a crucial role in various industries. The ZP Series AC DC converter is designed to meet the increasing demand for high-quality power conversion solutions. This article will delve into the features, benefits, and applications of the ZP Series, highlighting its importance in the modern power conversion landscape. Features of the ZP Series: 1. High Efficiency: The ZP Series is known for its exceptional energy efficiency, converting AC power to DC power with minimal loss. This efficiency not only reduces energy consumption but also helps in lowering operating costs. 2. Wide Input Voltage Range: The converter can adapt to a wide input voltage range, making it suitable for various applications and ensuring versatility in different operating environments. 3. Compact Design: The ZP Series is designed to be compact and space-efficient without compromising its performance. The smaller form factor makes it easy to integrate into existing systems, saving valuable space. 4. Advanced Thermal Management: The converter is equipped with advanced thermal management techniques, ensuring optimal heat dissipation and preventing overheating. This feature contributes to the overall reliability and longevity of the converter. 5. Robust Protection: The ZP Series is equipped with comprehensive...
Fully Modular 650W Power Supply: The Perfect Solution for Efficient and Customizable Power Management

2023-10-18

In today's technology-driven world, having a reliable and efficient power supply is crucial. Whether you are a gamer, a content creator, or a professional working with heavy-duty applications, having a power supply that meets your power demands is essential. This is where a fully modular 650W power supply comes into play. It offers the perfect solution for efficient and customizable power management. Firstly, let's understand what a fully modular power supply is. Unlike traditional power supplies, where all cables come pre-attached, a fully modular power supply allows users to connect only the cables they need. This eliminates unnecessary cable clutter inside the computer case, improving airflow and reducing heat build-up. With a fully modular power supply, you have the freedom to choose the cables that are compatible with your specific setup, ensuring a clean and organized system. One of the key advantages of a fully modular 650W power supply is its efficiency. These power supplies are designed with high-quality components and adhere to strict energy efficiency standards. They offer an efficiency rating of 80 Plus Gold or higher, which means they can convert up to 90% or more of the incoming AC power into DC power for your computer components....
Fully Modular Power Supply: Ultimate Flexibility and Efficiency in Power Management

2023-10-22

Power management is a critical aspect of any electronic device. From personal computers to gaming consoles, power supply units play a pivotal role in ensuring smooth and uninterrupted operation. Among the various types of power supplies available in the market, fully modular power supplies are gaining popularity due to their ultimate flexibility and efficiency. Traditional power supplies come with a fixed set of cables that are permanently attached to the unit. This limits the user's ability to customize and optimize their power management setup according to their specific needs. On the other hand, fully modular power supplies offer a unique advantage by allowing users to detach and connect only the necessary cables. This eliminates unnecessary clutter and improves airflow within the computer case, leading to better cooling and overall system performance. Flexibility is the key advantage of fully modular power supplies. With a traditional power supply, users often have to deal with a bundle of unused cables that take up valuable space inside the computer case. This not only hampers airflow but also makes cable management a nightmare. Fully modular power supplies solve this issue by allowing users to connect only the cables they need. This results in a clean...
แท็ก: ,

ตัวเลือกมากกว่า 6000+ โซลูชันการจ่ายไฟแบบครบวงจร