سپورٹ
سمارٹ گھر
مصنف: زیڈ وائی جی پاور ماڈیولریلیز کا وقت: 2022-1-3
Description:
Smart home controller and home intelligent equipment, is developing toward miniaturization, so it needs to work reliably in limited space and achieve more functions. Such as remote control and panel display for curtain controller.
Power supply mode:
The city power is converted to a stable 5V or 12V voltage source by using the AC/DC power module through 220V, supplying the MCU, relays and other loads.
Project features:
Traditional scheme 1: City power through the power frequency transformer to change into low voltage AC, and then rectifier, filter, voltage stabilizing circuit after processing to get a stable voltage, the disadvantage is large volume, low efficiency, low reliability.
Traditional scheme 2: using the latest switch power supply circuit design, the circuit of the whole cloth in the controller circuit boards. Disadvantages: 1. The design of switching power supply is a very professional, the safe distance in the circuit, thermal design and EMC have high requirements, so that the circuit board is designed to occupy a lot of space, squeezing the controller with other devices in space, is bound to affect the performance of the controller and the volume. 2. The aging of the power supply is not complete, the power supply is only overloaded aging, to expose some of the potential adverse factors, because the controller is responsible for the general circumstances are very light, so that it is possible to stream defective products into the client.
The features and advantages of existing schemes:Embedded Cost
Features: AC/DC module power supply is a stable pressure module with special process. It has good protection and high efficiency.
Advantage: 1. Volume is at least less than half the size of the design control panel. 2. The module body adopts the rubber design, so the security is better. 3. The module design for circuit design only input and output 4 lines for the control panel to save more space layout. 4. The reliability and cost performance of module power supply are higher. 5.The comprehensive cost of production is lower.
Recommended product series: ZP series.
There are important applications in smart home, lighting, electrical applicances and so on.(3~20W)
ZP series — a ultra small size module power supply offered by Zhongyiguang. The whole series is only 1.5cm thick. With extremely low no-load loss, isolated pressure up to 4kv,etc. The product is safe and reliable, which has a good EMC. EMC and safety specifications meet the IEC/EN61000-4、CISPR22/EN55022、The whole series is only 1.5cm thickUL60950/EN60950/EN60601 and other related standards. This series of products are widely used in smart home, high-end decorative lighting, medical, industrial, office and civil industries, such as applied to a relatively harsh environment electromagnetic compatibility must refer to the application circuit.
متعلقہ معلومات
-
2023-9-28
Fully Modular Power Supply: The Ultimate Solution for Organized Cable Management
Introduction: Technology plays a vital role in our lives. From smartphones to laptops, we rely on various electronic devices to stay connected and productive. However, one often overlooked component that powers these devices is the power supply unit (PSU). A fully modular power supply is a game-changer when it comes to cable management, offering a streamlined and efficient solution. What is a Fully Modular Power Supply? A fully modular power supply is a PSU that allows users to detach and connect cables as needed. Unlike semi-modular or non-modular power supplies, which come with permanently attached cables, a fully modular PSU offers flexibility and customization options. This means that users only need to connect the required cables, reducing cable clutter inside...
تفصیلات دیکھیں -
2023-6-16
SP Series AC DC Converter: Efficient Power Conversion for Your Devices
As technology advances, the need for efficient power conversion becomes increasingly important. The SP Series AC DC Converter is one solution that addresses this need. This device provides efficient power conversion for a variety of devices, making it an essential component for many applications. The SP Series AC DC Converter is designed to provide a reliable and efficient power source for electronic devices. It is equipped with a high-efficiency power conversion system that converts AC power to DC power with minimal loss. This results in increased energy savings and longer device lifespan. One of the key features of the SP Series AC DC Converter is its compact size and lightweight design. This makes it ideal for use in a variety...
تفصیلات دیکھیں -
2023-5-19
Efficient 110V AC to 12V DC Power Converter for Optimal Energy Conversion
The Efficient 110V AC to 12V DC Power Converter is an essential device for both home and professional use. This power converter enables optimal energy conversion from the AC current in your wall outlet to a DC current that\'s suitable for powering your electronics, appliances, and other gadgets. In terms of energy conversion efficiency, the 110V AC to 12V DC Power Converter is a compact device that offers a very impressive conversion ratio. Most efficient models have a green performance level over 80%, providing a reliable and advanced DC conversion solution that performs optimally each time you plug something in. The power converter sheds off any extra down-voltage ensuring all electronics function smoothly. Ideally, some equipment does not like nonlinear...
تفصیلات دیکھیں -
2023-11-13
DC to DC Power Supply Module: Efficient Voltage Conversion for Enhanced Performance
Introduction: In today's fast-paced technological world, the need for efficient power supply modules is paramount. From smartphones to electric vehicles, every electronic device requires a stable and reliable source of power. The DC to DC power supply module plays a crucial role in converting and regulating voltages to ensure optimal performance. This article will delve into the importance of these modules, their working principle, and their impact on enhancing device performance. Importance of DC to DC Power Supply Modules: The primary function of a DC to DC power supply module is to convert one DC voltage level to another. This conversion is essential as it allows electronic devices to operate at their optimal voltage levels. Additionally, these modules ensure voltage...
تفصیلات دیکھیں -
2023-4-14
AC-DC کنورٹر: الٹرنیٹنگ کرنٹ کو ڈائریکٹ کرنٹ میں تبدیل کرنا
An AC-DC converter is an important device that converts alternating current (AC) to direct current (DC). This conversion is necessary in many electronic devices because most of them require DC power to operate. AC-DC converters are used in a wide range of applications, from small household appliances to industrial machinery. In this article, we will explore the working principle of AC-DC converters and their different types. Working Principle of AC-DC Converters The basic principle behind an AC-DC converter is to convert the sinusoidal waveform of AC power into a DC voltage. This process involves rectifying the AC waveform and filtering the resulting waveform to produce a steady DC voltage. The rectifier circuit uses diodes to convert the AC waveform into...
تفصیلات دیکھیں -
2022-12-30
DC-DC کنورٹر فیکٹری: اپنی ضروریات کے لیے صحیح کا انتخاب کیسے کریں۔
جب DC-DC کنورٹر کو منتخب کرنے کی بات آتی ہے، تو یہ ضروری ہے کہ آپ اپنی ضروریات کے لیے صحیح کو منتخب کریں۔ جن عوامل پر غور کرنا ہے ان میں ان پٹ وولٹیج، آؤٹ پٹ وولٹیج اور کرنٹ شامل ہیں۔ صحیح DC-DC کنورٹر فیکٹری کا انتخاب ایک مشکل کام ہو سکتا ہے۔ غور کرنے کے بہت سے عوامل ہیں، جیسے معیار، قیمت، اور ترسیل کا وقت۔ اس بلاگ پوسٹ میں، ہم آپ کی ضروریات کے لیے صحیح DC-DC کنورٹر فیکٹری کا انتخاب کرنے کے بارے میں بات کریں گے۔ DC-DC کنورٹر فیکٹری کا انتخاب کرتے وقت، غور کرنے کے لیے چند عوامل ہیں، جیسے معیار، قیمت، اور ترسیل کا وقت۔ ایسی فیکٹری کا انتخاب کرنا ضروری ہے جو اعلیٰ معیار کی مصنوعات تیار کر سکے اور انہیں وقت پر فراہم کر سکے۔ قیمت بھی ایک اہم غور ہے۔ ایک فیکٹری تلاش کرنا ضروری ہے...
تفصیلات دیکھیں