关于DC-DC电源模块的重要性、结构以及如何选择？
Author： ZYG Power Module Time： 2022-4-7
With the development of the times, electronic products are more and more developed, DC-DC power modules are widely used in today’s society, and some electrical appliances used in daily life are also applied to them. Do you understand the importance and structure of DC-DC power modules? Know why you should choose a DC-DC power module? Today I will take you to find out.
The importance of DC-DC power module:
DC-DC power module is a compact, high quality regulated power supply products, using advanced manufacturing technology. Because the module power supply is simple to use, it has the advantages of convenient expansion and good maintainability when composing the system. Therefore, it is widely used in aerospace, communication power supply, automotive electronics, electronic equipment, power control and other fields. These module power supplies usually require a wide operating power range (36 V to 75 V) and high output power (can provide all-brick module power up to 700W), and the power density is very high, cooling design is a big problem.
For example, the half brick output power of 200W module power supply, its conversion efficiency is 89%, then 24.7W of electrical energy into heat, if there is no cooling measures, half brick module power supply may be damaged due to overheating. Therefore, in the design of high-power module power supply, appropriate heat dissipation design is more and more important.
Power structure of DC-DC power module:
The key components of the power structure of DC-DC power module are: pulse width modulator, optocoupler, VDMOS and Schottky diode.
The selection of power modules should be based on the following four points:
1, the use of mature power supply topology
The design of the power module is based on the mature power topology. These topologies have been tested over time and are mature and reliable.
2, high efficiency within the full load range
High efficiency means lower power loss and lower temperature rise, which can effectively improve reliability. In practical applications, the power supply will choose a certain degree of downscaling design, especially in today’s load IC power consumption is getting lower and lower, most of the time the power supply may work under light load conditions. Therefore, high efficiency over the entire load range is a key parameter for power system reliability, but it is often overlooked by power supply manufacturers.
3, limit temperature characteristics
The geographical area where the power module is applied is very wide and may have tropical climate and cold weather similar to Russian winter. Therefore, the minimum operating temperature range of DC-DC module is required to be -40 degrees to 85 degrees. The final temperature test is the most reliable way to verify this. The reliability of the power module, such as high temperature aging, high temperature and low temperature live operation performance test, high temperature and low temperature cycle impact test and long time high temperature and high humidity test, therefore, whether this test equipment has become the basis of judging whether the power manufacturer is a copycat manufacturer.
4, high isolation, low isolation capacitance
Medical products require extremely low leakage currents, while power electronics require as little parasitic capacitance as possible between primary and secondary. Both industries generally require the highest possible isolation voltage withstand and the lowest possible isolation capacitance to reduce the impact of common-mode interference on the system. For medical or power electronics applications, 1-2W DC-DCs are recommended to use a power module with an isolation capacitor less than 10pF, and a wide voltage product with a power module less than 150pF.
以前的： 如何选择质量过关、可靠的电源模块厂家？
下一个： 什么是模组电源模式
相关信息
-
2023-4-22
How to Differentiate Between an AC and DC Power Supply
Introduction Power supplies are essential components in many electronic devices. They convert the input voltage into the required voltage, current, and frequency to operate the device efficiently. There are two types of power supplies - AC and DC. AC stands for alternating current, while DC stands for direct current. In this article, we will differentiate between an AC and DC power supply. AC Power Supply An AC power supply is a type of power supply that receives alternating current as input and delivers alternating current as output. AC power supplies are commonly used in households and businesses as they are the standard for power supply from utility companies. They operate at a frequency of 50 or 60 Hz, depending on...
查看详情 -
2023-10-13
DC to DC Power Supply Module: An Efficient Solution for Power Conversion
The demand for efficient power conversion solutions has never been higher. As electronic devices become more advanced and power-hungry, it is crucial to find ways to convert power effectively and reliably. One such solution that has gained popularity is the DC to DC power supply module. A DC to DC power supply module is a compact electronic device that converts one DC voltage level to another, efficiently transferring power from a source to a load. This module plays a vital role in many applications, including telecommunications, automotive electronics, industrial equipment, and renewable energy systems. One of the primary advantages of using a DC to DC power supply module is its high efficiency. Traditional linear voltage regulators can waste a significant...
查看详情 -
2023-11-26
AC Power Supply Module: Efficient and Reliable Source of Electrical Energy
In today's modern world, electricity plays a vital role in our daily lives. It powers our homes, offices, industries, and even our personal gadgets. To ensure a steady supply of electrical energy, an efficient and reliable power supply module is essential. In this article, we will explore the importance of AC power supply modules and their benefits. Definition and Function: An AC power supply module is a device that converts alternating current (AC) from the main electrical grid into a stable and regulated voltage that can be used to power various electronic devices. It acts as a bridge between the power grid and the electrical loads, ensuring a constant and uninterrupted power supply. Efficiency: One of the key advantages of...
查看详情 -
2024-9-6
Explore AC and DC power: the energy cornerstone of modern life
In today's highly electrified and information-based age, electricity, as one of the cleanest and most efficient forms of energy, has penetrated every aspect of our lives, from home lighting and mobile phone charging to industrial production and urban operations, all of which depend on a stable and reliable power supply. Behind this, AC and DC power supplies, as a key technology for power conversion and distribution, play a vital role. In this article, we will explore the basic principles, application areas, and future development trends of AC and DC power supplies. 1. Basic Concepts of AC and DC Power Alternating current (AC): Alternating current refers to current whose direction and magnitude change periodically over time. In domestic and most industrial...
查看详情 -
2023-6-13
Efficient AC DC Power Supply with PFC Technology
Power supply technology has come a long way since the early days of electronics. One of the biggest advancements in power supply technology has been the development of Power Factor Correction (PFC) technology. PFC technology has revolutionized the way that power is delivered to electronic devices, making power supplies more efficient, reliable, and cost-effective. In this article, we will discuss how PFC technology works and how it has improved the efficiency of AC DC power supplies. What is PFC Technology? Power Factor Correction technology is a method of correcting the power factor in an AC circuit. The power factor is a ratio of the real power (watts) to the apparent power (volt-amperes) of a circuit, and it indicates how efficient...
查看详情 -
2023-4-25
how to wire ac to dc power supply
When it comes to converting AC to DC power, there are a few different methods that can be used. However, one of the most common and straightforward ways to accomplish this is by using a power supply. Here's a step-by-step guide on how to wire an AC to DC power supply: Step 1: Determine the voltage and current requirements Before you begin, it's important to know what voltage and current requirements you have for your DC load. This will help you choose the right power supply for your needs. Step 2: Choose the type of power supply There are two main types of power supplies: linear and switching. Linear power supplies are simple and provide a smooth output, but they...
查看详情