如何选择质量过关、可靠的电源模块厂家?
- 博客 - 行业新闻 - 如何解决电源模块选型问题

如何解决电源模块选型问题

Author: ZYG Power Module Time: 2022-12-20

It is not easy to select a power module. There are many difficulties to consider. How much do you know?

Magnetic beads, capacitors, diodes, resistors… all have similar inside stories, but people don’t pay much attention to them. There are various topologies of power modules, such as flyback, forward, push-pull, half-bridge, and full-bridge. Due to their different basic principles, each of them is mainly manifested in the advantages at the level of certain characteristic indicators.

The flyback power supply does not have a time period for charging and discharging the battery during the power switch period. That is because there is no time characteristic of the response characteristic, and the grain baud cannot be guaranteed to be very good, although it may not help much according to the energy storage capacitor , but the rationale is just a flaw.

Leakage inductance is also a big problem, but its advantages are simple power supply circuit, low cost, light weight, no need to add magnetic calibration windings, and a wider operating voltage range for typing. Because of this, its share of the total power supply sales market is about 7%.

 

 

The output voltage of the positive power supply has good transient operation characteristics and strong load capacity, but its disadvantages are also obvious. The large energy storage technology is used to filter the inductor and the freewheeling diode, which is large in size, and the back electromotive force of the primary coil of the transformer is high. .

The push-pull power supply has high transient response time, good working voltage and frequency characteristics. It is the most utilized power transformer of all topologies. No flux leakage, simple optocoupler circuit.

If the two forward converters are not completely symmetrical or balanced, the bias magnetism accumulated after many cycles will cause the magnetic core to enter a saturated state, resulting in excessive excitation current of the high-frequency transformer, and even damage the power switch tube.

The accumulative chainless power supply transformer has a large power and high working efficiency, the withstand voltage test value of the power switch tube is relatively low, and the primary coil of the transformer only needs to be wound once. The disadvantage is that the efficiency is low, there is a semiconductor area, and the consumption is large.

The above problems are all caused by the inherent advantages and disadvantages of its topology. Although people can use the power module as the black box of the aircraft, this is also a point that needs to be paid attention to when choosing a power supply.

相关信息

  • 2023-6-2

    DPX Series DC DC Converter: Efficient and Reliable Power Conversion Solution

    In today's world, reliable and efficient power conversion is crucial for a wide range of applications. Whether it's in the field of telecommunications, transportation, or industrial automation, DC-DC converters play a crucial role in ensuring that the power needs of various devices are met. This is where the DPX Series DC-DC Converter comes into play. The DPX Series is a highly efficient and reliable DC-DC converter solution that is designed to provide uninterrupted power supply to a wide range of devices. It is built with advanced technology that allows it to operate with high efficiency, making it ideal for use in applications where power consumption is a primary concern. One of the most significant advantages of the DPX Series is...

    查看详情
  • 2023-7-14

    ZP Series AC DC Converter: Unleashing Power and Efficiency

    In the fast-paced world we live in, where technology is constantly evolving and becoming more sophisticated, there is a growing demand for power conversion solutions that are both powerful and efficient. The ZP Series AC DC Converter has emerged as a frontrunner in meeting these demands, providing reliable and high-performance power conversion for a wide range of applications. The ZP Series AC DC Converter, manufactured by a leading power electronics company, is a compact and versatile device that converts alternating current (AC) to direct current (DC). It boasts an impressive power output and efficiency, making it an ideal choice for various industries, including telecommunications, industrial automation, renewable energy, and electric vehicle charging. One of the key features that sets the...

    查看详情
  • 2023-7-11

    120V AC to 12V DC Converter: Efficient Voltage Conversion Solution

    Introduction In today's rapidly evolving technological world, efficient voltage conversion solutions are crucial for various applications. One such solution is the 120V AC to 12V DC converter, which enables the conversion of alternating current (AC) to direct current (DC). This article aims to provide an overview of this converter, highlighting its efficiency and the benefits it offers. Understanding the 120V AC to 12V DC Converter The 120V AC to 12V DC converter is a device that transforms the electrical voltage from 120 volts alternating current (AC) into 12 volts direct current (DC). This conversion is necessary as many electronic devices, such as computers, televisions, and smartphones, require a lower voltage DC power source to operate efficiently and safely. Efficiency of...

    查看详情
  • 2022-3-30

    定制电源模块是否优于常规电源模块

    计算机技术的飞速发展引领人类进入信息社会,也推动了功率模块技术的飞速发展。八十年代,电脑全面采用开关电源,率先完成电脑电源更换。随后开关电源技术进入了电子电气设备领域。当今社会,大家在购买电源模块时,是选择普通电源模块还是定制电源模块呢?在大多数情况下,通用电源模块是可用的,而定制电源模块是专门为某些情况设置的。然后根据客户的实际需求,决定是定制电源模块还是购买通用电源模块。 ...

    查看详情
  • 2023-10-13

    Module Power Supply: Ensuring Reliable and Efficient Electrical Solutions

    Introduction: In today's rapidly evolving technological landscape, the demand for reliable and efficient electrical solutions has become more critical than ever. Module power supply plays a crucial role in meeting this demand, offering a wide range of benefits that contribute to the overall performance and longevity of electrical systems. This article explores the significance of module power supply, its functions, and the advantages it brings to various industries. 1. Understanding Module Power Supply: Module power supply refers to the use of modular units to provide electrical power to different devices or systems. These modular units are designed to offer flexibility, scalability, and ease of maintenance, making them an ideal solution in diverse applications. By utilizing modular components, power supplies can...

    查看详情
  • 2023-5-26

    AC DC Converter Module: Streamlining Power Conversion for Enhanced Efficiency

    The AC DC converter module is an essential component in modern electrical systems. It efficiently converts alternating current (AC) to direct current (DC) to power electronic devices. This process is vital because many portable devices rely on batteries that require DC power. The converter helps to streamline the power conversion process, ensuring that devices receive reliable, regulated, and stable power. The converter module consists of several components, including a transformer, rectifier, and filter. The transformer steps down the voltage from the AC power source, while the rectifier converts the AC to DC power. The filter then smoothens the output, removing any unwanted noise or ripple. In addition, the converter module can be designed to provide various output voltage levels, making...

    查看详情

6000+ 选项,一站式电源解决方案